Abstract:
|
The isothermal forming process of 2618 Al-alloy was simulated on the Gleeble-1500 thermal-mechanical simulator.The influence of the processing parameters(deformation temperature T,strain rate ε and deformation degree ε) on grain sizes was studied by the orthogonal test,and the optimal processing parameters,T=430 ℃,ε=8×10-3 s-1 and ε=40%,were determined,which were used to carry out isothermal forming.The microscopic examination indicates that the grain sizes of obtained forging are fine and uniform.
|
Funds:
|
黑龙江省教育厅(指导)项目(10543037)
|
AuthorIntro:
|
|
Reference:
|
[1]黄光胜,汪凌云,陈华,等.2618铝合金的热变形和加工图[J].中国有色金属学报,2005,15(5):763-763.
[2]赵静,郭鸿镇,姚泽坤.等温压缩工艺对1933铝合金组织性能的影响[J].航空制造技术,2007,(7):82-82.
[3]张宝昌.有色金属及热处理[M].西安:西北工业大学出版社,1992.
[4]刘晓晶,刘润广,姜国栋.2618铝合金后摇臂等温体积成型工艺的研究[J].金属成型工艺,2000,18(3):44-44.
[5]牛济泰.材料和热加工领域的物理模拟技术[M].北京:国防工业出版社,1999.
[6]王祥生.铸造实验技术[M].南京:东南大学出版社,1990.
[7]张成军,纪朝辉,董广强.实验设计与数据处理及其应用[M].哈尔滨:哈尔滨工业大学出版社,2000.
[8]Oguocha INA,Yannacopohs S.Natural aging behavior ofcast aluminum particular reinforced 2618 aluminum alloy[J].J.Master.Sci.,1996,31:3145-3151.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|