Abstract:
|
An 8-node hexahedral element finite element dynamic explicit program,combining one-point integration with viscosity damping hourglass control algorithm,was developed for studying the material flowing deformation in ironing process.Such hourglass control method effectively suppressed the spurious modes activated by reduced integration,and saved too much calculation time.Meanwhile,the multiple layers meshes along thickness direction,3D constitutive law and double sides contact algorithm could accurately describe distribution of stress and strain.Finally,example of ironing process simulation of thick cylinder part shows this solid element valid by comparing with experimental results.
|
Funds:
|
国家自然科学基金资助项目(50575080);;
国家科技支撑项目资助(2006BAF01A43)
|
AuthorIntro:
|
|
Reference:
|
[1]Guo Y Q,Batoz J L.Finite element procedures for strainestimations of sheet metal forming parts[J].Int.J.forNum.Methods in Engrg.,1990,30:1385-1401.
[2]Liu Y Q,Li Z G.Fast accurate prediction of blank shape insheet metal stamping forming[J].Acta Mechanica Solid Sin-ica,2004,17:36-42.
[3]苗量,陈文琳,李桂兰.基于有限元逆向法和正向法的板料成形过程中合理毛坯形状的确定[J].锻压技术,2006,31(2):15-18.
[4]Liu W K,Guo Yong,Tang Sing,et al.A multiple-quadra-ture eight-node hexahedral finite element for large deforma-tion elasto-plastic analysis[J].Comput.Methods Appl.Mech.Engrg.,1998,154:69-132.
[5]Li K P,Cescotto S.An 8-node brick element with mixed for-mulation for large deformation analysis[J].Comput.Meth-ods Appl.Mech.Engrg.,1997,14:157-204.
[6]Flanagan D P,Belytschko T.A uniform strain hexahedronand quadrilateral with orthogonal hourglass control[J].Int.J.for Num.Methods in Engrg.,1981,17:679-706.
[7]Belytschko T,Ong J S,Liu W K,et al.Hourglass control inlinear and nonlinear problems[J].Comput.Methods Appl.Mech.Engrg.,1984,43:251-276.
[8]Belytschko T,Bindeman L P.Assumed strain stabilization ofthe eight-node hexahedral element[J].Comput.MethodsAppl.Mech.Engrg.,1993,105:225-260.
[9]Liu W K,Hu Y K,Belytschko T.Multiple quadrature unde-rintegrated finite elements[J].Int.J.for Num.Methods inEngrg.,1994,37:3263-3289.
[10]Zhu Y Y,Cescotto S.Unified and mixed formulation of the8-node hexahedral elements by assumed strain method[J].Comput.Methods Appl.Mech.Engrg.,1996,129:177-209.
[11]Huang Y M,Lu Y H,Chan J W.An elasto-plastic finite ele-ment and experimental study of the ironing process[J].J.Mater.Process Technol.,1991,26:53-80.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|