|
Abstract：
|
|
Forming process simulation of rectangle box deep drawing by finite element simulation was carried out to study the spring back and thickness change of rectangle box.Through adjusting the unsuitable part for rectangle box and confirming the reasonable deepness,the matter of mould repairing for many times was avoided.The results indicate that the spring back value after drawing is smaller for the modified part,which meets the design requirement completely.In addition,the thickness change of the modified rectangle box tends to be more uniform,and has more reasonable stress,especially the stress of the cavity die.The loading curve is closer to linearity.So it can reduce the impaction to the mould and is in favor of prolonging the mould life.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]Kim Chul,Kim B M,Choi J C.Development of an integrat-ed computer-aided process planning system for press workingproducts[J].J.Mater.Process.Tech.,2000,101(1-3):188-192.
[2]刘军华.CAE技术在盒形件拉深的应用[J].模具技术,2004,(1):41-43.
[3]徐伟力,郭刚,李雪春,等.柱面压料面形式对矩形盒件拉深成形的影响[J].塑性工程学报,1998,5(2):45-49.
[4]杨玉英.盒形件成形机理的探讨[J].锻压技术,1989,14(6):13-17.
[5]肖作义,左虹,张涛,等.盒形件拉深毛坯合理轮廓线的确定[J].锻压机械,1995,(6):19-20.
[6]王永志,杨玉英,金朝海.方盒件拉深法兰区不均匀流动的模拟分析[J].材料科学与工艺,2004,12(1):99-102.
[7]曾乐,邓子玉.矩形盒深拉深成形有限元模拟[J].锻压技术,2006,31(1):3-6.
[8]林忠钦.车身覆盖件冲压成形仿真[M].北京:机械工业出版社,2004.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved