Transactions of Materials and Heat Treatment

Title：Some questions about the Flash design of closed-die forging

Authors： Wuhan Institute of technology Wang Huachang

Unit：

KeyWords： Die forging Die Die design

ClassificationCode：

year,vol(issue):pagenumber：1993,18(5):2-8

Abstract：

Present situation of flash design of closed-die forging and its defect are described in this paper. Based on it, this paper puts forward the conception of optimum deformation process of closed-die forging and analyse the purpose and Significance of theoretic optimum design method about the closed-die forging flash.

Funds：

湖北省自然科学基金

Reference：

[1]#12
[2] Viergge, K., Ein Beitrag zur Gestaltung des Gratspalts beim Gesenkschmieden, Diss. T. U. Hannover, 1969．
[3] Wolf, H., Relation Between Flash Ratio, Flash Thickness and Final Weight in Closed-Die Forging (in German), Fertigung stechnik, Berlin, 1955．
[4] #12
[5] Spies, K., "The Presforms in Closed-Die Forging and Their Preparation by Reducer Rolling" (in German) Doctoral Dissertation, Technical University Hannover, 1957．
[6] Neuberger, F.. and Moeckel, L., "Guidelines for Determining Flash Thickness and Flash Width/Thickness Ratio in Closed-Die Forging" (in German) Werkstattstechnik, 51(12) , 1961, P. 725．
[7] #12
[8] 包忠诩,用扩张形毛边槽代替常规毛边槽的试验研究,锻压技术
[9] 包忠诩,有关扩张形毛边槽的几个问题,锻压机械,1985,No.4,20-24．
[10] 库特·朗格,海因茨·梅迈尔-诺肯佩尔著,杜忠权等译,模锻,国防工业出版社,1989．
[11] 叶庆荣,论开式模锻合理的变形过程,热加工工艺,1986,No.2,P.52-55．
[12] 杜忠权等,模锻过程模拟及锻模优化设计与研究,金属科学与工艺,1992,No.1．
[13] 刘秀侠等,一种效益显著而又简单易行的提高锻模寿命的方法,热加工艺,1988,No.3．
[14] 刘润广等,扩张形飞边槽在薄叶片类锻件中的应用,模具技术,1990,No.3．

Service：

【This site has not yet opened Download Service】【Add Favorite】