Transactions of Materials and Heat Treatment

Title：Simulation analysis and bending die design of supporting frame

Authors： DONG Lan1 ZHANG Yin-qian2 LI You-yu1(1.Mechano-electronic Engineering Department Qingdao Binhai College Qingdao 266555 China 2.Qingdao Haiao Moye Company Qingdao 266031 China)

Unit：

KeyWords： support bending numerical simulation bending die

ClassificationCode：TG385

year,vol(issue):pagenumber：2008,33(1):99-102

Abstract：

FEM analysis software of DYNAFORM was used to simulate the bending form for the support.The result showed that serious thinning was found in one die forming,and the distribution of stress and thickness of forming in two sets of dies are better than those in one die forming.So the bending forming in two sets of dies for support was determined.At the same time,the progressive bending die was designed.Two sets of bending dies for the support were fixed on one die carrier,so bending forming for the support was finished in one running distance.Then,the disadvantages of forming in one operation were avoided,and the low efficiency problem was also solved with single process.

Funds：

Reference：

[1]姜奎华.冲压工艺与模具设计[M].北京:机械工业出版社,1999.
[2]谭雪松,谢正超.Pro/ENGINEER2001中文版基础教程[M].北京:人民邮电出版社,2003.
[3]杨太德.支架冲压工艺与模具设计[J].锻压技术,2007,32(5):101-102.
[4]董兰,田福祥.杠杆式弯曲模[J].锻压技术,2006,31(4):73-74.
[5]刘林强,田福祥.DYNAFORM-PC软件简介及使用技巧[J].锻造与冲压,2004,(3):16-18.
[6]岳陆游,姜银方,陈炜,等.DYNAFORM-PC软件及其在钣金冲压中的应用[J].江苏大学学报(自然科学版),2002,23(11):51-55.

Service：

【This site has not yet opened Download Service】【Add Favorite】