|
Abstract：
|
|
Fine-blanking is an advanced metal forming process derived from conventional blanking process.Since it is a large,localized plastic deformation process,and dramatic material flow occurs in the shearing band close to the edge of punch and die,still some difficulties exist during the process simulation.In view of ductile damage,ductile fracture criterion,simulation of fracture occurrence and propagation,the developments of some corresponding technologies were reviewed in the numerical simulation of fine-blanking process.
|
|
Funds：
|
|
国家自然科学基金资助项目(50505027)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]Chen Z H,Tang C Y,Lee T C.Numerical si mulation of fine-blanking process using a mixed finite element method[J].Inter-national Journal of Mechanical Sciences,2002,44:1309-1333.
[2]Mcclintock F A.Acriteria for ductile fracture by the growthof holes[J].Journal of Applied Mechanics,TransactionsASME,1968,35:363-371.
[3]Rice J R,Tracey D.On the ductile enlargement of voids intriaxial stress fields[J].Journal of the Mechanics and Physicsof Solids,1969,17:201-217.
[4]Gurson A L.Continuumtheory of ductile rupture by void nu-cleation and growth,I.Yield criteria and flowrules for por-ous ductile media[J].Engineering Material Technology,1977,99:2-15.
[5]Tvergaard V.Influence of voids on shear andinstabilities un-der plane strain conditions[J].International Journal of Frac-ture,1981,17:389-407.
[6]Thomason P F.Ductile fracture by the growth and coales-cence of microvoids of non-uniformsize and spacing[J].ActaMetallurgia et Materialia,1993,41:2127-2134.
[7]Gologanu M,Leblond J B,Perrin G,et al.Recent Extensions ofGurson s model for porous ductile metals.In:Suquet,P.(Ed.)Continuum Micromechanics[M].Berlin:Spriger-Verlag,1995.
[8]李国琛.论韧性材料的可膨胀塑性本构方程及分叉时塑性加载路径[J].中国科学,1990,12(12):1282-1289.
[9]郑长卿,张克实,周利.金属韧性破坏的细观力学及其研究应用[M].北京:国防工业出版社,1995.
[10]谢晓龙.精冲成形延性损伤断裂与数值模拟研究[D].上海:上海交通大学,2007.
[11]Oyane M,Sato T,Oki moto K,et al.Criteria for ductile frac-ture and their applications[J].Journal of the Mechanics andPhysics of Solids,1969,17:201-217.
[12]Cockroft M,Latham D.Ductility and workability of metals[J].Journal of Institute of Metals,1968,96:33-39.
[13]Brozzo P,De Luca B,Rendina R.Anew methodfor the pre-diction of formability in metal sheet;sheet metal forming andformability[A].Proceedings of the 7th Biennial Conferenceof the IDDRG[C].Netherland,1972.
[14]Khan S M A,Khraisheh M K.Analysis of mixed mode crackinitiation angles under various loading conditions[J].Engi-neering Fracture Mechanics,2000,67:397-419.
[15]Komori K.Si mulation of tensile test by node separation meth-od[J].Journal of Materials Processing Technology,2002,125-126:608-612.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved