Transactions of Materials and Heat Treatment

Title：KBE-based framework of multi-Agent cooperative design for die and mould

Authors： ZHOU Sheng LI Jian-jun(State Key Laboratory of Material Processing and Die and Mould Technology College of Materials Science and Engineering Huazhong University of Science and Technology Wuhan 430074 China)

Unit：

KeyWords： die and mold collaborative design Agent knowledge based engineering

ClassificationCode：TP391.7

year,vol(issue):pagenumber：2008,33(1):77-81

Abstract：

Aiming at the disadvantages of traditional serial design method,three-tier framework of multi-agent cooperative design for die and mould was presented,and then the procedure of mould design in this framework was expounded.Furthermore,the structure of knowledge base was illustrated,a combined method of automatic and non-automatic was applied to obtain the knowledge,and the representation approaches of process design knowledge and structure design knowledge were emphatically introduced.At last,by analyzing the properties of Agent,the functions of Agent's modules were explained in detail.By adopting KBE and Agent technology,the quality and efficiency of mould design are greatly improved.

Funds：

国家科技支撑计划项目(2006BAF01A43)

Reference：

[1]张浩,于同敏.基于PDM的注塑模并行设计系统研究[J].模具制造,2002,10(5):3-5.
[2]汪瀚,周雄辉,张永清.基于计算机支持的协同工作的注塑模协同设计研究[J].机械科学与技术,2001,20(1):128-130.
[3]来可伟,殷国富.并行设计[M].北京:机械工业出版社,2003.
[4]陈军,赵震,余德泉,等基于知识的板料冲裁工艺与模具设计支持技术[J].材料科学与工艺,2004,12(4):383-390.
[5]王小林,郑光文.基于KBE的连续拉深工艺辅助设计[J].锻压技术,2006,31(4):135-137.
[6]唐合存,姜开宇,于同敏.KBE技术在注塑模具设计中的应用[J].塑料科技,2006,34:36-39.
[7]苏铁明.计算机支持的协同设计框架及若干关键技术研究[D].大连:大连理工大学博士学位论文,2003.

Service：

【This site has not yet opened Download Service】【Add Favorite】