Transactions of Materials and Heat Treatment

Title：Combined process of drawing and reverse drawing in one step of engine oil filter shell

Authors： YU Ming1 QIAO Guang1 JIN Ming-hua1 LU Chun-lin2 LIU Bin-chun3 (1.Roll Forming Institute Jilin University Changchun 130025 China 2. Changchun Faway-Johson Controls Automotive Systems Co. Ltd. Changchun 130033 China 3. Aviation Theory Department of Aviati

Unit：

KeyWords： car oil filter shell drawing and reverse drawing tube-shaped parts

ClassificationCode：TG386.41

year,vol(issue):pagenumber：2009,34(6):94-96

Abstract：

Car oil filter is an important component to protect the work reliability of automotive engine,and extend engine life. Oil filter shell is a typical deep drawing cylindrical part,usually requires several deep drawing working procedures. The characteristic of combined foringm process of drawing and reverse drawing in one step for tube-shaped parts was described,combined foringm process of drawing and reverse drawing in one step for tube-shaped parts was put forward and its blanking die was designed and appled to the practical production. The objective of high-quality,high-yield and energy saving was realized.

Funds：

Reference：

[1]张俊红.汽车发动机构造[M].天津:天津大学出版社,2006.
[2]王毓民,王恒.实用汽车润滑技术手册[M].北京:化学工业出版社,北京:2005.
[3]中国机械工程学会锻压学会.锻压手册[M].北京:机械工业出版社,1993.
[4]陈炜.基于数值模拟的板料多道次拉深工艺研究[J].农业机械学报,2002,33(4):95-98.
[5]姜奎华主编.冲压工艺与模具设计[M].北京:机械工业出版社,1995.

Service：

【This site has not yet opened Download Service】【Add Favorite】