Abstract:
|
Autoform was used to simulate the stamping process of car engine hood outer panel.The influence of length and width exchange on formability was analyzed.The high-strain zone was also figured out.The result shows that the strain in the high-strain zone changes greatly before and after the exchange of length and width.No cracking happens before the exchange,but it appears after the exchange.With the help of FLD,the strain state in the high strain zone is the plane strain state.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]吴华,蒋浩民,汪承璞.数值模拟在汽车板成形中的应用[J].宝钢技术,2002,(1):48-50.
[2]王孝培.冲压手册[M].北京:机械工业出版社,1988.
[3]雷正保.汽车覆盖件冲压成形CAE技术[M].北京:国防科技大学出版社,2003.
[4]DYNAFORM-PC User's Manual Detroit:Engineering Tech- nology Associates,2002.
[5]赵侠,傅建.余玲,等.数值模拟技术在汽车覆盖件成形中的应用[J].锻压技术,2006,31(1):15-21.
[6]康永林.现代汽车板的质量控制与成形性[M].北京:冶金工业出版,1999.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|