|
Abstract：
|
|
BSCCO high temperature superconducting tapes are the only superconducing materials,which can be indus- trialized and have been applied in the field of strong and weak electricity now.The main processing method is multi- step drawing and rolling with plastic deformation,which is one typical kind of plastic forming processes with multi-core and multi-field.It is defined as microforming in Macro-field(2MF),due to its microscopic forming.The principle and theoretical frame of microforming in macro-field were put forward,including the characteristic of 2MF,the definition of forming size,the relationship between directly-actied microforming and 2MF,the size effect,the material effect,the friction effect,the temperature effect and so on.The basic experimental test,numerical simulation,theoretical analysis and technical experiment were used to study the basic scientific research of 2MF and an energy-saving and high efficient technological plan was put forward which could be used in practical process to provide guidance for forming of BSCCO superconducting tapes.
|
|
Funds：
|
|
国家自然科学基金资助重点项目(No．50635050)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]侯炳林，朱学武．高温超导储能应用研究的新进展[J]．低温与超导，2005，33(3)：46-54．
[2]郭国才，何锡武．周平．船用高温超导推进电动机技术与应用前景[J]．船电技术，2005，(5)：1-5
[3]Bech J I,Nielsen M S,Eriksen M,et al.Analysis of flat roll- ing of superconducting silver/ceramic composites[J].Annals of the CRIP,2001,50(1):210-204.
[4]Nielsen M S,Bech J I,Eriksen M,et al.,Strategic flat roll- ing of Ag/BSCCO-2223 tapes[J].Physica C,2002,(372- 376):966-969.
[5]Tkaczyk J E,Arendt R H,Bednarczyk P J,et al.Supercon ducting joints formed beteween powder-in-tube Bi 2 Sr 2 Ca 2 Cu3Oz/Ag tapes[J].IEEE Transactions on Applied Super- conductivity,1993,3(1):946-948.
[6]Kim J H,Joo J.A superconducting joint between Bi-Pb-Sr- Ca-Cu-O multifilamentary[J].Supercond.Sci.Technol., 2002,15:1600-1605.
[7]Bech J I,Eriken M,Toussaint F,et al.Mechanical charac- terization of superconductor BSCCO powder and mumerical modeling of the OPIT precess[A].Proceedings 2000 Powder Metallurgy World Congr.[C].Kyoto,Japan,2000.
[8]Geiger M,Kleiner M,Eckstein R,et al.Microforming[J]. Annals of the CIRP,2001,50(2):445-462.
[9]Vollertsen F,Hu Z,Schulze H,et al.State of the art micro- forming and investingations into micro deep drawing[J]. Journal of Manufacturing Science and Engineering,2004, (151):70-79.
[10]申昱，于沪平，阮雪榆，等．金属微成形技术[J]．塑性工程学报，2003，10(6)：5-8．
[11]张凯锋，雷鹍．面向微细制造的微成形技术[J]．中国机械工程，2004，15(12)：1121-1127．
[12]李经天，董湘怀，黄菊花．微细塑性成形进展[J]，塑性工程学报，2004，11(4)：1-8．
[13]Geiger M,Vollertsen F,Kals R.Fundamentals on the manu- facturing of sheet metal microparts[J].Annals of the CIRP, 1996,(45):277-282.
[14]Akhtar S K,Huang S.Continuum theory of plasticity[M]. New York:John Wiley & Sons,1995.
[15]Fleck N A,Hutchinson J W.Strain gradient plasticity[J]. Advanced Applied Mechanics,1997,(33):295-361.
[16]Kim D J,Ku T W,Kang B S.Finite element analysis of mi- cro-rolling using grain and grain boundary elements[J]. Journal of Manufacturing Science and Engineering,2002, (130-131):456-461.
[17]潘宁BE.万群，马福康，郭青蔚，等译．物理介观力学和材料的计算机辅助技术[M]．北京：冶金工业出版社，2002．
[18]赵迎红．铋系高温超导带材成形行为的研究[D]．北京：清华大学，2006．
[19]蔡芳．铋系高温超导线材拉拔工艺的研究[D]．北京：清华大学，2007．
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved