|
Abstract：
|
|
The driving device of the conventional mechanical press is composed of clutch,brake and flywheel.Such driving style makes it hard to change the speed,so the mechanical press has less flexible.Aiming at the disadvantage of mechanical press,a new slide driving structure and press control concept were proposed.The mathematic model of the slide motion control was established,further more,with the mathematic model,the simulation model based on Simulink software was set up and the simulation experiments were carried out according to the demand of press control and monitoring.The press control system software was developed.Finally,an actual system and its stamping test were introduced.The test result shows that the design is correct.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]赵升吨,王二郎,尚春阳,等.J H23-63型冲床的PLC控制[J].制造业自动化,2001,23(234):59 62.
[2]陈桂,李宁.运动控制系统[M].北京:高等教育出版社,2004.
[3]曲家骐,王季秩.伺服控制系统中的传感器[M].北京:机械工业出版社,1998.155
[4]黄宗卫.Si mulink在控制系统的建模、仿真及分析中的应用[J].舰船电子对抗,2004,27:34 37.
[5]席平原.机械工程控制系统仿真实例分析[J].淮海工学院学报,2003,12(3):13 17.
[6]北京昆仑通态自动化软件科技有限公司.MCGS用户指南[R].2005.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved