Abstract:
|
On the base of the analysis of the characteristics of structure and technical feature of the parts,the method of multi-stamping,which could finish the working steps including inputting,stretching,punching and drawing in one mould,was adopted in the research.The parts with a smooth surface produced by this method can meet the product requirement,reduce the die cost,raise the production efficiency and stabilize the product quality.The composite die structure feature,designing idea and possible problems in assembly process were introduced.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]杜东福,苟文熙.冷冲压模具设计[M].长沙:湖南科技出版社,1994.
[2]王孝培.冲压手册[M].北京:机械工业出版社,2002.
[3]模具设计手册编写组.冲模设计手册[M].北京:机械工业出版社,2001.
[4]模具应用技术丛书编委会.冲模设计应用实例[M].北京:机械工业出版社,2003.
[5]夏华,胡亚民,黎勇,等.离合器端盖成形工艺及模具设计[J].锻压技术,2005,30(2):44.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|