Abstract:
|
Disc-ring sleeve forgings are similar in their shapes,and there exist overlaps and blank region in the traditional size scope division.So it is difficult for the forging CAPP system to make a decision automatically.Based on actual production in the forging enterprise,the disc-ring sleeve forging size scope was adjusted and consummated,and an investigation on the aspects of the automatic decision-making method of forging type and deforming procedures combined with the development of forging CAPP system was made.According to the adjusted size scope and deforming procedure of the disc-ring sleeve forging,the forging CAPP system was developed successfully.Its applied result in the related enterprises indicates that the system is of certain usability.
|
Funds:
|
南京工程学院科研基金资助项目(K06-07)
|
AuthorIntro:
|
|
Reference:
|
[1]赵汝嘉.计算机辅助工艺设计(CAPP)[M].北京:机械工业出版社,1995.
[2]周大隽.锻压技术数据手册[M].北京:机械工业出版社,1998.
[3]黄阳,朱育林,李东波.锻造CAPP专家系统生成技术的研制[J].机电产品的开发与创新,2006,19(6):79-80.
[4]李鸿吉.VB6.0编程方法详解[M].北京:科学出版社,2002.
[5]王大康,刘永峰,石亚宁.智能化CAPP系统的工艺决策[J].北京工业大学学报,2003,29(2):129-132.
[6]李集仁,杨良伟.锻工实用技术手册[M].江苏:江苏科学技术出版社,2002.
[7]高骏.锻造类型CAPP系统研究与开发[D].南京:南京理工大学,2003.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|