Transactions of Materials and Heat Treatment

Title：Crankshaft flexibility analysis of the crank press based on ANSYS

Authors： ZHOU Zhi-hong LI Xiao SUN Chang-sheng(School of Civil and Environment Engineering University of Science and Technology Beijing Beijing 100083 China)

Unit：

KeyWords： crankshaft flexibility ANSYS load

ClassificationCode：TG315.5

year,vol(issue):pagenumber：2007,32(5):114-117

Abstract：

The crankshaft flexibility of J23-80 crank press was calculated by using the bending theory of variable cross-section beams,the error between the theory value and field measurement value was 4%.The finite element analysis software ANSYS was used to analyze the model of the crankshaft.In this process,two different measures were used to load the crankshaft: the error between the theory value and field measurement value was 1.1% when the crankshaft was loaded with the uniformly-distributed load before the deformation of the crankshaft;the error was 12.8% when the crankshaft was loaded with the central force after the deformation of the crankshaft.The result is that the uniformly-distributed load shall be loaded to the crankshaft when using finite element analysis measure,and the result of analysis is more feasible and closer to the real status of the deformation of the crankshaft.

Funds：

Reference：

[1]何德誉.曲柄压力机[M].北京:机械工业出版社,1981.
[2]樊文欣,杨世文,张红兵.高速柴油机曲轴动态特性研究[J].测试技术学报,1997,11(1):53-58.
[3]苏铁熊,李小雷,崔志琴.发动机曲轴动态设计研究[J].车用发动机,2002,4(2):13-15.
[4]刘国庆,杨庆东.ANSYS工程应用教程(机械篇)[M].北京:中国铁道出版社,2003.
[5]张朝晖.ANSYS 8.0结构分析及实例解析[M].北京:机械工业出版社,2005.

Service：

【This site has not yet opened Download Service】【Add Favorite】