Abstract:
|
In traditional process,1Cr18Ni9Ti stainless steel plate material needs to be drawn several times.Not only its production period is too long and its cost is high,but also its production efficiency is low.The drawing of a stainless steel cylindrical part was stated.By reasonably adjusting the clearance between punch and die and especially using new lubricant and lubricating method,the cylindrical part can be drawn with a good surface quality under the condition of no heat treatment or with different heat treatment processes.The result shows that the method can be applied in a mass production,the serve life of the die is prolonged obviously and high efficiency is achieved.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]李硕本.冲压工艺学[M].北京:机械工业出版社,1984.
[2]黄毅宏,李明.模具制造工艺[M].北京:机械工业出版社,1999.
[3]张正修.厚板冲压技术[J].模具技术,1997,(4):44-46.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|