Abstract:
|
The stress characteristic of the main working methods for processing the special-shaped wire,such as drawing,driven roller die and rolling was analyzed.Because the stress characteristics of drawing and driven roller die are biaxial draw stress and uniaxial pressure stress,so drawing or driven roller die is favorable to the non-ferrous metal of higher plasticity and is of disbennifit to that of lower plasticity.The production process become very difficult when non-ferrous metal of lower plasticity is broken.Although the stress characteristic of rolling is a triaxial pressure stress,rolling working is favorable both to the non-ferrous metal of higher or lower plasticity,but roller making and maintenance of rolling machine are very expensive.So it is better to use the rolling method for high yield production.The stress characteristic of swaging is the same as that of rolling.The production yield of swaging is lower.Swaging is maybe applicable for producing the special-shaped non-ferrous metal wire of lower plasticity,lower yield and high profit.
|
Funds:
|
云南省省院省校合作资助项目(2000PBAEA00A045)
|
AuthorIntro:
|
|
Reference:
|
[1]李勇,张玉新,钟毅,等.辊模拉拔技术的分析与应用[J].金属材料研究,2003,29(4):15-20.
[2]郑宝龙,李连诗.辊模拉拔异型丝的实验研究[J].金属制品,1992,18(6):12-14.
[3]岳志军,康武军.异型钢丝的生产[J].金属制品,2001,27(4):20-21.
[4]郑宝龙,朱为昌.辊模拉拔技术及其应用[J].金属成形工艺,1996,14(1):43-46.
[5]王庸禄.有待认识与开发的辊模拉拔[J].金属制品,1991,17(3):4-7.
[6]方树铭.眼镜框架铰链异型材扭曲原因初探[J].云南冶金,1998,27(增刊):125-130.
[7]郭居瑾.旋揉工艺[J].金属成形工艺,2000,18(6):40-42.
[8]张文芹.旋锻法生产舰船用特种焊条的工艺探索[J].河南冶金,2001,(2):12-24.
[9]彭志辉.稀有金属材料加工工艺学[M].长沙:中南大学出版社,2003.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|