Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Influence of hot compression parameters on flow stress and microstructure of TA15 alloy
Authors: WANG Bin~1 GUO Hong-zhen~1 YAO Ze-kun~1 CHEN Jin-ke~2 LI Peng-chuan~2(1.School of Material Science and Engieering Northwestern Polytechnical University Xi'an Shanxi 710072 China 2.China National Erzhong Group Co. Deyang Sichuan 618013 China) 
Unit:  
KeyWords: TA15 Titanium alloy isothermal compression flow stress microstructure 
ClassificationCode:TG113
year,vol(issue):pagenumber:2006,31(6):106-109
Abstract:
The test of the isothermal compression with constant strain rate of TA15 alloy has been studied at the α+β phase region and β phase region in this paper.The stress-strain curves of it have obtained and changing laws of the flow stress and microstructure have been discussed.The results show that the strain rate obviously affects the flow stress of TA15.The extent of the effect of deformation temperature on flow stress is related to the measure of strain rate.The uniform,fine and equiaxed α phase structure is achieved at lower temperature and faster strain rate.But the structure was coarsened definitely at slow strain rate.The optimum isothermal compression temperature is between 980℃ and 900℃,the strain rate may be selected within the constant range according to the need of forging forming,structure properties and productivity.Under good forming condition of forgings,strain rate may be appropriately raised.
Funds:
AuthorIntro:
Reference:
[1]曹京霞,方波,等.微观组织对TA15钛合金力学性能的影响[J].稀有金属,2004(2):362 364.
[2]王宝善,马文革,等.近β锻造工艺在BT-20合金上的应用[J].金属学报,2002,38(9):385 388.
[3]Cho J R,Dye D,et al.Intergranular strain accumulation in anear-alpha titanium alloy during plastic deformation[J].2002,50:4847 4864.
[4]李兴元,刘瑞民,等.显微组织对TA15合金疲劳性能的影响[J].金属学报,2002,38(9):280 281.
[5]陆辛,白秉哲,海锦涛.Ti-6Al-4V在压缩状态下的超塑性行为[C].钛科学与工程(第六界全国钛及钛合金学术交流会文集),1987.
[6]Scmiatin S L,et al.Deformation and unstable flow in hotforging of Ti-6Al-2Sn-4Zr-2Mo-0.1Si[J].MetallurgicalTransactions,1981,12A:1705 1717.
[7]Dunne F P E,et al.Inhomogeneity of Microstructure in Su-perplasticity and Its Effect on Ductility[J].InternationalJournal of Plasticity,1998,14:413 433.
Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com