Abstract:
|
Because ZCuPb10Sn10 material is difficult to be deformed by cold extrusion forming,the author introduces the technologic process of the uniformly annealed and immersed in oil for 24 hours before extrusion,optimized thickness size and three dimension stress state in the paper.The result indicates that it breaks through the mistaken ideas that the organization can only be machined.Through the process,the casting organization is successfully extruded to change its performance.The technology enhances the prolongation ratio to 11% from 6%,saves 73.6% working time and 37.03% material.It improves loading capacity of whole bearing board and increases its service life.It has realized the goal of high qualities,high efficiency and material-saving.
|
Funds:
|
十五预研课题(40404060201)
|
AuthorIntro:
|
|
Reference:
|
[1]汪大年.金属塑性成形原理[M].北京:机械工业出版社,1986.
[2]王仁,黄文彬.塑性力学引论[M].北京:北京大学出版社,1982.
[3]菲格林著,薛永春译.金属等温变形工艺[M].北京:国防工业出版社,1982.
[4]杨永顺、李延峰.实体轴承保持器等温挤压技术经济分析[J].技术经济,2001,8(8):32 34.
[5]周福章.滚动轴承制造工艺学[M].西安:西北工业大学出版社,1993.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|