Abstract:
|
According to the principles and technology of ring rolling,a rolling technics of C-section rim ring including the product and die design was introduced.Controlling key points and main parameters of blank profile in every working procedure were listed,meanwhile,the problems in rolling were analyzed and the methods for solving the problems were put forward.As a successful technics,the material utilization rate is increased by 28% and production efficiency is twice than before.The economic and social benefit is gained.It provides a new thought and approach for the rolling of the special-shaped ring with complex sections in future.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]М.Ю.席夫林.车轮和轮箍轧制[M].北京:中国工业出版社,1965.
[2]程必福、蔡钊、李恺.车轮轮箍生产(上册)[M].北京:冶金工业部工人视听教材编辑部,1991.
[3]孙在进,华林.阶梯环件轧制变形规律和尺寸计算[J].锻压机械,1995,18(4):387-390.
[4]华林,黄兴高,朱春东.环件轧制理论和技术[M].北京:机械工业出版社,2001.
[5]许思广,曹起骧,连家创.环件轧制技术的研究[J].钢铁,1994,29(7):78-81.
[6]华林.台阶截面环件轧制中的拉缩和壁厚变化规律[J].武汉汽车工业大学学报,1996,18(2):53-58.
[7]陈志刚,菅海燕,宋涛.大型钛环的轧制[J].锻压技术,1994,19(5):43-45.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|