Transactions of Materials and Heat Treatment

Title：Experimental study on parameters of technology and forming in three rollers cross-rolling

Authors： DENG Yu-shan~(1) LI Ming-zhe~(1) FU Wen-zhi~(1) LI Xiang-ji~(1) SUN Gang~(1) YAO Xiao-jing~(2)(1.Rolling Forging Technology Institute Jilin University Changchun Jilin 130025 China 2.Training Center FAW Changchun Jilin 130011 China)

Unit：

KeyWords： three rollers cross-rolling deformation resistance forming angle instability

ClassificationCode：TG335

year,vol(issue):pagenumber：2006,31(5):81-83

Abstract：

Three rollers cross-rolling technology has been applied to the production of automobile half-axle casing, because that the workpiece quality is influenced by the forming parameters which are selected reasonably to improve the workpiece quality.The forming angle of forming roller is the key parameter to influence the technology in three rollers cross-rolling,which is close connected to deformation resistance、pushing force and wall thickness increment.Corresponding relationship between roller forming angle and the parameters has been acquired by examination and Pn-β 、P-β 、ΔH-β curve relationship is confirmed in order to give the instruction on reasonably choosing the parameters in controlling the workpiece quality.In addition,the reason that the workpiece of three rollers cross-rolling having instability in the course of shrinking has been analyzed in this paper.Avoiding these reasons will improve the workpiece quality effectively.

Funds：

Reference：

[1]韩英淳,庄蔚敏,鄂大辛.管坯正挤横轧的成形极限[J].塑性工程学报,2004,11(1):65 67.
[2]韩英淳,王学明,朱晓波.半轴套管正挤横轧变化规律与产品质量控制[J].中国机械工程,2003,14(6):517 519.
[3]何忠宝,韩英淳,崔波.半轴套管横轧工艺参数的测量[J].汽车工艺与材料,1996(2):36 37.

Service：

【This site has not yet opened Download Service】【Add Favorite】