Transactions of Materials and Heat Treatment

Title：Key technologies of digitized degign for cross wedge rolling mould

Authors： CAO Yu-hong~(1 2) WANG Bao-yu~(1) HU Zheng-huan~(1)(1.School of Mechanical Engineering University of Science and Technology Beijing Beijing 100083 China 2.Department of Educational Technology Guangdong Technic Normal University Guangzhou Guangdong 510665

Unit：

KeyWords： cross wedge rolling digitized design concurrent engineering

ClassificationCode：TP391.7

year,vol(issue):pagenumber：2006,31(5):84-89

Abstract：

The key technologies of digitized design for cross wedge rolling mould are introduced which include digital feature modeling,knowledge-based design,concurrent engineering,reverse engineering, and virtual design.Feature-based modeling for manufacture and feature-based for performance analyze are put forward at the same time.Knowledge-based engineering is used to show the cases of cross wedge rolling mould and to discover rules among them.Concurrent engineering is adopted to actualize concurrent between design and analysis,and that between design and manufacture.Virtual design is introduced to constitute virtual environment of cross wedge rolling mould to perform virtual assembly and virtual manufacture.

Funds：

国家自然科学基金重点资助项目(50435010);; 国家自然科学基金面上项目(No.50575023)资助;; 华中科技大学塑性成形模拟及模具技术国家重点实验室资助项目(06-4)

Reference：

[1]胡正寰.楔横轧零件成形技术与模拟仿真[M].北京:冶金工业出版社,2004.
[2]熊有伦,尹周平.数字化制造和数字装备[J].数字化制造科学,2003,1(1):2 14.
[3]陈阳,刘海江.面向制造的特征建模[J].机械制造,2003,21(6):15 17.
[4]赵震,彭颖红.基于知识的冲裁模具结构智能设计关键技术研究[J].锻压技术,2003,(4):54 57.
[5]周雄辉,李祥,熊培友.基于知识的模具并行工程系统方法[J].模具技术2001,35(7):998 1002.
[6]郭盛,卢晓春,阮锋.基于模具设计质量控制的软件系统设计[J].模具工业,2004,(4):14 16.
[7]姚勇,刘斌.KDD技术及其在故障诊断中的应用[J].信息技术,2003,27(2):69 71.
[8]周雄辉,林建平,阮雪榆.并行工程环境下的模具制造[J].1996,(4):7 11.
[9]项辉宇,钟约先,焦洪杰,等.基于模拟的注塑工艺分析设计集成系统的开发[J].机械科学与技术,2003,22(2):256 258.
[10]何煜琛,张和明,刘成颖,等.DFM的关键技术与实现模式研究[J].2001,7(11):46 50.
[11]蔡玉俊,王敏杰,王建玲.基于数字化逆向工程的模具快速设计[J].电加工与模具,2003(6):43 47.
[12]王坚,徐国华.基于人工神经网络的虚拟设计[J].机械科学与技术,2003,22(7):201 203.
[13]冷晟,魏孝斌.基于Pro/E的虚拟设计与制造环境的研究与开发[J].机械与电子,2003,(1):10 12.
[14]袁名松,迟毅林,张淼.虚拟设计发展现状及未来发展方向[J].昆明理工大学学报,2002,27(5):21 25.

Service：

【This site has not yet opened Download Service】【Add Favorite】