|
Abstract：
|
|
The good quality,low costs and short cycle of die design can be practiced by CAD system of die.In this paper,the CAD system for cup drawing die has been studied by the secondary development of AutoCAD2002 using Visual Basic 6.0.The system is module-structured.The function and implementation of the main modules such as,technology calculation module,the die design module and drawing automatically module etc.are also stated by the paper.The system can design all kinds of cup products varied in dimensions by computer aided.The design efficiency and quality of cup product are increased by using the CAD system.
|
|
Funds：
|
|
陕西省自然科学基金资助(2004E206)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]尹丽娟.Active Automation在AutoCAD二次开发中的应用[J].机械科学与技术,2000,(3):510 511.
[2]赵健,陈拂晓,上官林建.深孔薄壁件挤压模CAD系统[J].锻压技术,2002,(3):58 60.
[3]杨立军,党新安,夏田.基于VB的AutoCAD二次开发技术[J].现代制造工程,2004,(3):27 28.
[4]张晋西.Visual Basic与AutoCAD二次开发[M].北京:清华大学出版社,2002.
[5]梅树立,王泽林,田竹友,等.基于深度测试的二维图形消隐技术[J].北京机械工业学院学报,1999,14(2):38 41.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved