Abstract:
|
In this paper,according to the characters of the piston tail part,the die forging process and the key technology are analyzed in detailed.Then,the two steps forging scheme is designed-one for making billet and the other for end shape.The models are simulated using Deform-3D software.The results of the simulation show: Only when the quantity of deformation is proper divided in two steps,the part can be forged successfully.The program can be a feasible scheme and can be used to guide the production.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]孙海亭,施张.高温强度和耐磨性优良的粉末冶金铝合金活塞[J].小型内燃机,1998,(5):26 29.
[2]夏巨谌,丁永祥,胡国安.闭式模锻[M].机械工业出版社,1993.
[3]夏巨谌.精密塑性成形工艺[M].机械工业出版社,1999.
[4]洪深泽.挤压工艺及模具设计[M].机械工业出版社,1996.
[5]王孝培.冲压设计资料[M].机械工业出版社,1992.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|