Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Effects of plant powder-water base lubricant on the maximum drawing load
Authors: Guan Xiaojun  Ma Jing  Zhou Jiajuan  Liu Qingjin  Zhang Jixiang  Dong Anping   (Shandong University) 
Unit:  
KeyWords: Lubricant  Plant powder  Water based  Drawing  Orthogonal experiment 
ClassificationCode:TG386
year,vol(issue):pagenumber:2004,29(3):68-70
Abstract:
The orthogonal experiment was conducted to investigate the effect of the different concentration combination of plant powder, tackifier and emusifier on the maximum drawing load in a plant powder -water base lubricant invented by us. The results show that the effects of the three ingredients on the maximum drawing load are obviously different, and the effect of the plant powder concentration is the most remarkable among them and there exists an optimized concentration combination. Compared to that under the condition without lubricants, the maximum drawing load under the optimized lubricated condition decreases by about 14%. And the surface qualification of the part is clearly improved.
Funds:
AuthorIntro:
Reference:
1 何丹农,陶宏之等拉深用润滑剂的摩擦系数和压边力的关系研究摩擦学学报,2000(6):223~225
2 李芬芳绿色润滑剂—21世纪润滑剂的发展趋势合成润滑材料,1997,24(4):18~22
3 李芬芳,董浚修润滑剂与环境污染.重庆环境科学,1998(10):44~46
4 HirofumiYoshimuraetal.Applicationofwheatflourlubricantstothepress formingprocessJournalofMaterialsProcessingTechnology,2002,125~126:375~378
5 邓陟,王先进,陈鹤峥编著.金属薄板成形技术.北京:兵器工业出版社,1993
Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com