Transactions of Materials and Heat Treatment

Title：Evaluating model of process plan for large complicated Stampings

Authors： ZHENG Jin-qiao WANG Yi-lin LI Zhi-gang(State Key Laboratory of Die & Mold Technology Huazhong University of Science & Technology)

Unit：

KeyWords： Large complicated stampings Stamping process plan Evaluating model

ClassificationCode：TG386

year,vol(issue):pagenumber：2004,29(5):12-16

Abstract：

This paper establishes a quantitative evaluating model for stamping process plan of large complicated stampings, which considers the knowledge of process planning and expert's experience of large complicated stampings, and ascertains relatively factors and its ration for the model. The evaluating model has been applied to the self-evaluation process planning system for large complicated stampings.

Funds：

国家科技攻关课题 (2 0 0 1BA2 0 3B0 9) ;; 博士学科点基金项目(2 0 0 1 0 4 870 34)

Reference：

1　王义林,王耕耘,李志刚基于特征的汽车覆盖件冲压CAPP系统研究计算机集成制造系统—CIMS ,1996(4):32～37
2　王义林汽车覆盖件冲压CAPP系统及其关键技术研究:[学位论文],华中理工大学博士学位论文,1996
3　易俊松汽车覆盖件冲压CAPP方法及系统实现:[学位论文],华中理工大学硕士学位论文,2000
4　吴强,王义林,李志刚基于特征的派生式车身覆盖件冲压CAPP的研究模具技术,1997(4):8～11
5　刘胜余,王义林,李志刚基于实例推理的覆盖件冲压CAPP研究计算机辅助工程,2001(1):18～23
6　郑莹,李尚健,李志刚,等汽车覆盖件成形数值模拟研究中国机械工程,1997,8(4):31～33,52
7　郑莹,董湘怀,李尚健,等板料冲压仿真系统设计中国机械工程,1999,10(5):449～551
8　张海明,董湘怀,黄菊花,等弹塑性回映算法及其在板料成形模拟中的应用华中科技大学学报,2001,29(9):87～88
9　兰箭,董湘怀,李志刚用有限元逆算法计算板料成形毛坯形状和应变分布塑性工程学报,2001,8(2):60～62
10孙启霞,金宁价值工程———动态不对称法海天出版社,1999
11张曾科模糊数学在自动化技术中的应用清华大学出版社,1997
12吴秉坚模糊数学及其经济分析中国标准出版社,1994

Service：

【This site has not yet opened Download Service】【Add Favorite】