Transactions of Materials and Heat Treatment

Title：Comparison of the forming characteristics between GA and dura steel sheet

Authors： CHEN Xin-ping~(1) FENG Wei-jun~(1) SUN Fang-zhong CHEN Xiao-bang~(2) SHI Lin~2 (1.Baoshan Iron and Steel Co.Ltd Shanghai 201900 China 2.Passenger Vehicle Company Dongfeng Motor Co.Ltd. Guangzhou Guangdong 510800 China)

Unit：

KeyWords： alloy Zn-Fe GA forming characteristics

ClassificationCode：TG386.32

year,vol(issue):pagenumber：2005,30(5):18-21

Abstract：

The difference of forming characteristics between the galvanized and dura steel is studied by uniaxial tension test and simulative forming test in this paper.Then the surface morphology under various deformations are analyzed.It is shown that compared with GA steel Dura steel can reduce the coefficient of friction between the interaction of steel and die due to the lubrication of organic film and enhance the homogenization of strain distribution in the stamping process.

Funds：

Reference：

[1]蒋浩民,陈新平,谢坚强,等.预磷化处理对电镀纯锌钢板成形性能的影响研究[J].汽车工艺与材料,2004,(7):55 56,59.
[2]Meuleman D J,Denner S G,Cheng F L.The effect of zinccoatings on the formability of automotive sheet steels[J].SAE Paper,1984,(840370):910 917.
[3]Liu Y.Effect of coating characteristics on friction and formability ofZn-Fe alloy electroplated sheet steel[J].Journal of Materials En-gineering and Performance,1996,5(4):469 477.
[4]Hirose Y,Sakane T,Wakano S,Sudo C.Frictional behaviorof new polymer lubricating film for coated steel sheets[J].SAE Paper 1993,(930810):945 950.
[5]Michal G M,Paik D J.The effect of forming velocity andstain path on the performance of galvannealed sheet steels[J].Galvatech 2001:73 80.
[6]陈新平,鲍平,蒋浩民.润滑条件对超深冲IF钢成形性能的影响[J].金属成形工艺,2002,(2):8 9.
[7]陈新平,汪承璞.一种预测左半部成形极限图的简单方法[J].金属成形工艺,2000,(4):4 6.
[8]陈新平,蒋浩民.汽车钢板胀形区成形极限图的预测和验证[J].金属成形工艺,2003,(6):86 88.

Service：

【This site has not yet opened Download Service】【Add Favorite】