Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Study on semi-solid compression technology of magnesium matrix composites
Authors: HU Zhi1 YAN Hong1 ZHENG Zhi-gang1 HU Yong2(1.Institute of Advanced Forming Technology Nanchang University Nanchang 330031 China 2.School of Mechanical and Electronical Engineering East China Jiaotong University Nanchang 330013 China) 
Unit:  
KeyWords: metal matrix composite semi-solid compression deformation microstructure evolution 
ClassificationCode:TG306
year,vol(issue):pagenumber:2010,35(2):94-97
Abstract:
Microstructure evolution of semi-solid SiCp/AZ61 composites with different deformation temperatures,strain rates,volume fractions of SiCp and deformation degree during compression process was investigated.The results show that friction coefficient is decreased and the possibility of solid particles or aggregates slipping and rotating will increase with the temperature increase.The liquid phase during low strain rate distributes around the matrix with the strain rate decrease.The grain size decreases obviously with the deformation increase.
Funds:
国家自然科学基金资助项目(50765005);; 江西省自然科学基金资助项目(2007GZC1826);; 江西省教育厅资助项目(GJJ09011)
AuthorIntro:
Reference:
[1]谢水生,黄声宏.半固态金属加工技术及其应用[M].北京:冶金工业出版社,1999.
[2]张发云,闫洪,陈国香,等.SiCP/AZ61镁基复合材料制备工艺和性能的研究[J].铸造,2007,56(6):611-614.
[3]王建金.SiC_p/AZ61复合材料触变塑性成形本构关系研究[D].南昌:南昌大学,2008.
[4]薛勇,张治民,郎利辉,等.AZ91D镁合金高温压缩变形行为[J].锻压技术,2009,34(1):135-138.
[5]罗守靖,祖丽君,杜之明,等.SiC颗粒对SiCp/2024复合材料半固态下压缩行为的影响[J].特种铸造及有色合金,2001,(S1):145-147.
[6]Yan H,Zhou B F.Thixotropic deformation behavior of semi-solid AZ61 magnesium alloy during compression process[J].Materials Science and Engineering:B,2006,132:179-182.
[7]黄维超,卢雅琳,江海涛,等.Al-4Cu-Mg合金半固态压缩过程中的微观组织演变[J].特种铸造及有色合金,2004,(6):8-10.
[8]杨雄飞,康永林,宋仁伯,等.60Si2Mn半固态压缩变形组织演变[J].中国有色金属学报,2000,10(1):120-125.
[9]赵祖德,程远胜,朱世凤,等.Al/Al2O3复合材料的伪半固态压缩变形力学行为[J].材料研究报,2007,21(3):240-244.
Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com