|
Abstract：
|
|
ABAQUS was used to simulate the stamping process for electrodeposited nickel coating plate.In the simulation,a built-in Cohesive zone model of ABAQUS was used to present electrodepsited nickel coating steel's interface performance.The computational results show that,at the interface,the normal stress is between-113.765-3 MPa and the maximum tangential stress is 50 MPa,and the maximum interface stress is at the die fillet during the process of stamping.Finally the case of delamination was analyzed by changing blankholder force,clerance between punch and die,friction faltor,and tool radii.This method can be used as a guidance for shell's forming manufactue.
|
|
Funds：
|
|
湖南省自然科学基金资助项目(09JJ6064)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]刘红霞,矫桂琼,熊伟,等.复合材料层合板分层分析中的界面元应用[J].机械强度,2008,30(2):301-304.
[2]叶碧泉,羿旭明,靳胜勇,等.用界面元法分析复合材料界面力学性能[J].应用数学和力学,1996,17(4):343-348.
[3]崔维成.复合材料结构破坏过程的计算机模拟[J].复合材料学报,1996,13(4):102-111.
[4]Van den Bosch M J,Schreurs P J G,Geers M G D.On theprediction of delamination during deep-drawing of polymercoated metal sheet[J].Journal of Materials ProcessingTechnology,2009,209(1):297-302.
[5]周里群.电沉积镍涂层的冲击性能与冲压成形过程分析[D].湘潭:湘潭大学,2004.
[6]陈普会,柴亚南.整体复合材料结构失效分析的粘聚区模型[J].南京航空航天大学学报,2008,40(4):442-446.
[7]蒋丽梅.鼓泡法表征韧性膜/韧性基底界面结合能的理论模型[D].湘潭:湘潭大学,2008.
[8]胡传炘,宋幼慧.涂层技术原理及应用[M].北京:化学工业出版社,2000.
[9]Xiao L H,Su X P,Wang J H,et al.A novel blister test toevaluate the interface strength between nickel coating and lowcarbon steel substrate[J].Materials Science and Engineer-ing,2009,501(A):235-241.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved