Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Research on digital on-line stress monitoring system of main columns in hydraulic press
Authors: GONG Jin-li TAN Jian-ping CHEN Hui 
Unit: Central South University 
KeyWords: hydraulic press  column  stress detecting  on-line monitoring system 
ClassificationCode:TG316.8
year,vol(issue):pagenumber:2010,35(4):81-85
Abstract:

The status quo and problems of the traditional stress monitoring system of the main columns in the hydraulic press were analyzed and a new method for high precision and digital on-line stress monitoring system of the main columns in the hydraulic press which based on the micro-displacement sensors and bus communication technology was proposed. By detecting the micro-displacement of the columns when loaded, the system could calculate the column stress effectively. The PLC was used to process the multi-point stress data and the PC was used to monitor the column stress. The experimental test and actual running on the 300 MN die forging hydraulic press shows that the system has high detection precision, strong anti-interference and good stability. It can realize the on-line monitoring under the bad environment of the industrial site.

Funds:
国家高技术研究发展计划(863计划)资助项目(2007AA04Z417);国家重大科技专项(2009ZX04005-031)
AuthorIntro:
Reference:


[1]姚淑萍,张国斌,董霞,等.2000吨水压机立柱断裂分析[J].冶金分析,2004,(24):560-562.
[2]关腾,方春林.6000吨水压机立柱断裂原因浅析[J].一重技术,2002,94(4):63-65.
[3]郁宏.125MN自由锻造液压机立柱应力测试分析[J].一重技术,2007,115(1):44-46.
[4]黄明辉,张可,许良琼.巨型模锻水压机立柱应力在线检测及保护系统[J].中南工业大学学报,1997,28(5):474-477.
[5]陈晖,谭建平,龚金利巨型模锻水压机立柱应力检测系统方案研究[J].锻压技术,2009,34(3):113-116.
[6]陈晖,黄长征,潘鑫,等.基于WinCC的300MN模锻水压机监控系统设计[J].微计算机信息,2007,23(1):45-47.
[7]王三秀,蒋胜韬.S7-200系列PLC与PC间基于自由口通讯的实现[J].科学技术与工程,2008,8(23):6357-6360.
[8]谭建平,苏勇,周俊峰,等.300 MN模锻水压机操纵系统复杂网络控制实现[J].锻压技术,2007,32(1):84-87.
[9]Chen Hui, Tan Jiangping, Gong Jinli. A digital method for detecting hydraulic press column stress based on profibus-dp fieldbus[A].Measuring Technology and Mechatronics Automation[C]. Zhangjiajie: IEEE computer society,2009.
[10]Zhang Jiancheng,Zhou Entao,Chen  Jianwen.Construction of on\|line monitoring and fault diagnosis system for large scale complicated hydraulic equipment [J].The Fluid Power and Systems Technology Division (Publication) FPST, Fluid Power Systems and Technology, 1997,4:177-181.

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com