Transactions of Materials and Heat Treatment

Title：Design and manufacture of stamping die for the washer profile gasket

Authors： YANG Hai-peng LIU Yong-ming

Unit： Jiangmen Polytechnic

KeyWords： stainless steel profile gasket jointly blanking technology part layout die design and manufacture.

ClassificationCode：TG76

year,vol(issue):pagenumber：2010,35(5):115-117

Abstract：

The structural shape and dimension were adjusted indispensably for jointly blanking in terms of two stainless steel parts of pulsator profile gasket on fully-auto washer and anhydr-bucket profile gasket on twin-tube washer. The two parts were formed simultaneously in a set of composite stamping die by adopting the reasonable blanking technology, the suitable die construction and materials, as well as the heat treatment process. As a result, a lot of materials were saved in favor of the improvement of productivity, and good technology and economic efficiency were also obtained.

Funds：

Reference：

［1］孟令先.冷作模具的失效分析与预防措施[J]. 锻压技术,2007，32（3）： 134-136.
［2］李小青.多工序复合模设计的探索和实践[J]. 锻压技术,2007， 32（4）:64-66.
［3］刘先兰，张文玉.冷作模具钢的选择及应用[J]. 锻压技术,2007， 32(6):13-17.
［4］肖亚慧，李长俊.夹片落料、冲孔、压弯复合模具设计[J]. 锻压技术,2008，33(6)：91-92.
［5］姜立忠，汽车结构件多工位精密级进模排样及模具设计[J]. 锻压技术,2008，33（3）：41-43.
［6］李叔宝，彭维珠.圆弧面凹模刃口直边线切割加工工艺设计[J].模具工业,2010，(3)：71-74.
［7］王树勋，吴裕农，朱亚林，等.典型模具结构图册[M].广州：广东华南理工大学出版社,2005.
［8］刘靖岩.冷冲压工艺与模具设计[M].北京：中国轻工业出版社,2006.
［9］吴元徽.模具材料与热处理[M].辽宁：大连理工大学出版社,2007.
［10］王树勋，杨海鹏，武晓红,等.冷冲压工艺与模具设计[M].北京：电子工业出版社，2009.

Service：

【This site has not yet opened Download Service】【Add Favorite】