Transactions of Materials and Heat Treatment

Title：Design of progressive die for stamping smart card plate based on Pro/E

Authors： WANG Zhe-ying WANG Ke JIANG Jie

Unit： Shenyang University of Technology

KeyWords： multi-operation progressive die blanking forming smart card plate technological design

ClassificationCode：TG386

year,vol(issue):pagenumber：2010,35(6):92-94

Abstract：

The stamping process of smart card plate was analyzed. The design of blanking process was presented, including the determination of operation sequence and process scheme. In addition, the general structural design of a multi-operation progressive die, the layout design, the forming characteristics and calculation method for key components were introduced.

Funds：

辽宁省博士启动基金资助项目(20071022)

Reference：

［1］模具实用技术丛书编委会. 冲模设计应用实例[M]. 北京:机械工业出版社,2003.
［2］刘占军.支撑板多工位级进模设计[J].模具工业,2005,31(4):26-28.
［3］彭卫东.小连接板硬质合金级进模设计[J].模具工业,2002,28(12):24-25.
［4］薛啟翔.冲压工艺与模具设计实例分析[M].北京：机械工业出版社,2008.
［5］考试与命题研究组.模具CAD/CAM习题与学习指导[M].北京：北京理工大学出版社,2009.
［6］张渝，张甫仁，安治国.基于送向工程的汽车加油口铰链冲压模具设计[J].机械设计与制造，2010，（3）：238-239.
［7］王永兵,祁文军，孙文磊，等.反求工程与快速成型一体化应用研究[J].热加工工艺，2008，37（3）：107-109.
［8］董延春，宋微，刘毅.基于Pro/E的汽车前轴油封盖冲压模具设计[J].机械工程，2010，（3）：141.

Service：

【This site has not yet opened Download Service】【Add Favorite】