Transactions of Materials and Heat Treatment

Title：Microstructure and properties of cold rolled Cu88Fe12 alloys

Authors： ZHOU Zhi-ming CAO Min-min TANG Li-wen LIU Chun WANG Ya-ping

Unit： Chongqing University of Technology Xi'an Jiaotong University

KeyWords： Cu88Fe12 alloys cold rolled microstructure

ClassificationCode：TG146

year,vol(issue):pagenumber：2010,35(6):109-111

Abstract：

The microstructures and properties of heavily cold rolled Cu88Fe12 alloys at low strain rate were studied at room temperature. The experiment results show that the microstructure of Fe\|rich phases are deformed to ribbons filaments, the microhardness increases continuously with the increasing of rolling strain, the electrical conductivity first decreases gradually with the deformation strain, however, after deforming to certain degree, the electrical conductivity increases again.

Funds：

重庆市自然科学基金; 重庆市教育委员会科学技术研究项目; 新世纪优秀人才支持计划（NCET-07-0679）; 重庆理工大学基金（09-60-16）

Reference：

［1］郭炜,王渠东. 大塑性变形制备超细晶复合材料的研究进展[J]. 锻压技术, 2010, 35（1）: 4-9.
［2］王德宝,吴玉程,王文芳，等. 机械合金化诱导难互溶系Cu-Cr合金固溶度扩展的研究[J].稀有金属，2008，32（1）：17-22.
［3］徐洪辉,杜勇,陈海林，等. 高强度、高电导率铜基合金材料的研究现状及发展[J]. 材料导报,2004, 18(10):37-40.
［4］Rabbe D. Simulation of the resistivity of heavily cold worked Cu-20wt.% Nb wires[J]. Computational Mater. Sci., 1995,(3):402-412.
［5］Gao H Y, Wang J, Shu D, et al. Effect of Ag on the aging characteristics of Cu-Fe in situ composites[J]. Scripta Mater.,2006,54:1931-1935.
［6］Ge J P, Zhao H, Yao Z Q. Strength of deformation processed Cu-Fe in situ composites[J]. Trans. Nonferrous Met. Soc. China, 2005, 15(3): 553-559.
［7］Biselli C, Morris D G. Microstructure and strength of Cu-Fe in situ composites obtained prealloyed Cu-Fe alloys[J]. Acta Metal. Mater., 1994, 42(1): 163-176.
［8］Jerman G A, Anderson I E, Verhoeven J D, et al. Strength and electrical conductivity of deformation-processed Cu-vol Pct Fe alloys produced by power metallurgy techniques
［J］. Metall. Trans A, 1993,24:35-42.
［9］Hong S I, Hill M A. Microstructural and conductivity of Cu-Nb microcomposites fabricated by the bundling and drawing process[J]. Scripta.Mater., 2001,44:2509-2513.
［10］Spitzig W A. Strengthening in heavily deformation processed Cu-20% Nb[J]. Acta Metal. Mater., 1991,39:1085-1090.

Service：

【This site has not yet opened Download Service】【Add Favorite】