Transactions of Materials and Heat Treatment

Title：Research on OPT theory application in production planning of forging enterprise

Authors： LIU Lei ZUO Xiao-ming TONG Yi-fei

Unit： Huaiyin Institute of Technology Nanjing University of Science & Technology

KeyWords： forging OPT theory DBR system production planning management

ClassificationCode：P237

year,vol(issue):pagenumber：2010,35(6):152-154

Abstract：

Taking production planning management of forging enterprises as research object, a DBR (Drum-Buffer-Rope) system was constructed based on OPT theory. The application feasibility of OPT theory, bottlenecks recognition, the structure of DBR system, push/pull planning methods and job planning methods of bottlenecks were mainly studied. Finally, the structure of production planning management system was introduced. The system functions well in forging enterprise, which results in a more convenient production planning, higher utilization of bottlenecks equipment and production stability .

Funds：

Reference：

［1］李淑红,童放. 浅谈曲轴自由锻造的下料计算[J]. 锻压技术，2005,30(4):1-2.
［2］唐文华. 面向订单半流程制造业车间生产计划与控制的研究和应用[D].广州:广东工业大学, 2003.
［3］刘磊. 自由锻企业生产计划管理研究及系统开发[D]. 南京:南京理工大学,2009.
［4］李浩. 订货型企业基于约束理论的订单排产优化研究[J].中国机械工程，2004, (10):865-868.
［5］王玉荣. 瓶颈管理(TOC)[M]. 北京:机械工业出版社, 2002.
［6］张建国. 基于OPT思想的ZMJ ERP作业计划编制方法研究[D]. 天津:河北工业大学,2008.
［7］郭永辉. 以DBR理论为基础的供应链协同产能规划[J].现代制造工程，2010, (2):39-41.
［8］高文会. 约束理论的瓶颈识别研究[J].西安石油大学学报，2008, 17(1):51-56.
［9］杨丰,李建军,肖祥芷. 基于Web的模具企业生产管理系统研究[J].锻压技术，2003,28(2):64-67.
［10］张祥林,宋亚鹏,黄绍祚. 模架企业定制化制造业务管理系统研究[J].锻压技术，2007,32(4):109-112.

Service：

【This site has not yet opened Download Service】【Add Favorite】