Transactions of Materials and Heat Treatment

Title：Research progress of thin-wall tube spinning

Authors： LI Xin-he YANG Xin-quan WANG Yan-fen

Unit： Central South University

KeyWords： thin wall tube spinning technology

ClassificationCode：TG301

year,vol(issue):pagenumber：2011,36(1):7-12

Abstract：

The development of domestic and foreign spinning fundamental research and processing technology progress of the thin-wall tubes were reviewed. Spinning method of the thin-wall tubes, material flow characteristics and power parameters in spinning process, and variable parameters associated with the machining accuracy, tube spinning ability and application of composite technology were introduced. Spinning processing characteristics of the extra-thin-walled tubes were analyzed. The main forming features of the extra thin-wall tubes compared with the thick-wall tubes are: the instability of the material flow, the sensitivity of the clearance of workpiece and mandrel, and the sensitivity of the uneven distribution of residual stress. In order to meet the needs of industrial development,the theory of compatibility of deformation of the thin-wall parts in spinning process was strived to carry out and it should gradually develop in the direction to the integrated intelligent spinning and to establish a common spinning expert system.

Funds：

国家重点基础研究发展计划（973）项目资助(2009CB724300)

Reference：

［1］赵云豪.旋压技术现状[J].锻压技术，2007，32（5）：95-97.
［2］赵云豪，李彦利.旋压技术与应用[M].北京:机械工业出版社，2007.
［3］刘建华，杨和，李玉强.旋压技术基础原理的研究现状与发展趋势[J].重型机械，2002，（2）：1-4.
［4］赵琳瑜，韩冬，张立武,等.旋压成形技术和设备的典型应用与发展[J].锻压技术，2007，32（6）：18-25.
［5］陈适先.强力旋压及其应用[M].北京：国防工业出版社，1966.
［6］王成和，刘克璋.旋压技术[M].北京：机械工业出版社，1986.
［7］王玉辉，夏琴香，杨明辉，等.数控旋压机床的发展历程及其研究现状[J].锻压技术，2006，31(4)：97-99.
［8］赵云豪.旋压技术现状[J].锻压技术，2005，30(5)：95-97.
［9］赵云豪，张顺福.国内旋压技术发展的回顾与展望[A].第七届全国旋压学术年会论文集[C].广州，1999.
［10］ Singhal P R, Saxena P K, Prakash R. Estimation of power in the shear spinning of long tubes in hard-to-work materials[J].Journal of Materials Processing Technology,1990, 23:29-40.
［11］ Xue K, Wang Z, Lu Y. Elastc plastic FEM analysis and experimental study of diametral growth in tube spinning[J]. Journal of Materials Processing Technology,1997,69 :172-175.
［12］ Xue K, Lu Y, Zhao X. A study of matching relationships amongst technical parameters in stagger spinning[J]. Journal of Materials Processing Technology ,1997,69:167-171.
［13］ Xue K, Lu Y, Zhao X. The disposal of key problems in the FEM analysis of tube stagger spinning[J]. Journal of Materials Processing Technology ,1997,69:176-179.
［14］ Mohan T R, Misra R. Studies on power spinning of tubes[J]. International Journal of Production Research, 1970,10:351-364.
［15］ Hayama M, Kudo H. Analysis of diametrical growth and working forces in tube spinning[J]. Bulletin of Japan Society of Mechanical Engineers ,1979,22:776-784.
［16］ Wang T, Wang Z R, Wang Q,et al.The slipline fields of thickness-reduction spinning and the engineering calculation of the spinning forces[A]. Proceedings of the Fourth International Conference of Rotary Forming[C]. Beijing,1989.
［17］ Park J W, Kim Y H, Bae W B. Analysis of tube spinning processes by the upper bound stream function method[J]. Journal of Materials Processing Technology,1997,66:195-203.
［18］ Paunoiu V, Nicoara D, Teodorescu M. A general upper bound method for forces calculation in tube spinning process[J]. Advanced Technology of Plasticity, 1999,1:1095-1100
［19］ Li K, Hao N, Lu Y, et al. Research on the distribution of the displacement in backward tube spinning[J]. Journal of Materials Processing Technology ,1998,79:185-188.
［20］ Mohebbi M S, Akbarzadeh A. Experimental study and FEM analysis of redundant strains in flow forming of tubes[J]. Journal of Materials Processing Technology , 2010,210:389-395.
［21］ Jahazi M, Ebrahimi G. The influence of flow-forming parameters and microstructure on the quality of a D6ac steel[J]. Journal of Materials Processing Technology , 2000,103:362-366.
［22］ Gur M, Tirosh J. Plastic flow instability under compressive loading during shear spinning process[J]. Transactions of the ASME, Journal of Engineering for Industry ,1982,104:17-22.
［23］ Ma Z E. Optimal angle of attack in tube spinning[J]. Journal of Materials Processing Technology ,1993,37:217-280.
［24］ Rajnish P, Singhal R P. Shear spinning of technology for the manufacture of long thin wall tubes of small bore[J]. Journal of Materials Processing Technology ,1995,54:186-192.
［25］ Joseph Davidsona M, Balasubramanianb K, Tagorea G. An experimental study on the quality offlow-formed AA6061 tubes[J]. Journal of Materials Processing Technology ,2008,203:21-325.
［26］ Kalpakcioglu S. Maximum reduction in power spinning of tubes[J]. J. Eng. Ind., Trans. ASME, 1964,86:49-54.
［27］ Honglie X, Wengang F. A research on the spinnability of normal steel castings[A]. Proceedings of the Fourth International Conference of Rotary Forming[C]. Beijing,1989.
［28］ D Xu. Thickness reduction spinning of the thin-walled cylinder with inner stiffness[A]. Proceedings of the Fourth International Conference of Rotary Forming[C]. Beijing,1989.
［29］ Chang S C, Huang C A, Yu S Y, et al. Tube spinnability of AA2024 and 7075 aluminum[J]. Journal of Materials Processing Technology ,1998,80-81:676-682.
［30］ Wong C C, Dean T A, Lin J. A review of spinning, shear forming and flow forming processes[J]. International Journal of Machine Tools and Manufacture ,2003,43:1419-1435.
［31］ Wong C C, Danno A, Tong K K, et al. Cold rotary forming of thin-wall component from flat-disc blank[J]. Journal of materials processing technology,2008,208:53-62.

Service：

【This site has not yet opened Download Service】【Add Favorite】