Transactions of Materials and Heat Treatment

Title：Research on roll shape for rolling molybdenum plate based on Deform

Authors： FU Cai-an HAO Jian PENG Guang-pan JI Kun

Unit： Jiang Nan University

KeyWords： molybdenum plate roll shape CVC roll SMART Crown roll Deform

ClassificationCode：TG146.4;TG335.5

year,vol(issue):pagenumber：2011,36(3):50-54

Abstract：

Aiming at the serious defective material and tearing in rolling process of molybdenum plate, the common roll crown, such as line roll shape, CVC roll shape and SMART Crown were analyzed comparatively in curve design of the roll shape, rolling stress and damage. And an optimal roll shape was designed to solve the above problem. The results show that optimal roll's rolling stress is 1.68 times as much as that of present roll，however, damage value resulted from optimal roll shape is the least among the four rolls shapes.

Funds：

Reference：

［1］杨松涛，李继文，魏世忠，等. 纯钼及钼合金板材轧制加工工艺探讨[J].材料研究与应用，2010，（3）：60-64.
［2］吕立华.金属塑性变形与轧制原理[M].北京：化学工业出版社，2007.
［3］魏钢城，曹建国，张杰，等.2250CVC热连轧机工作辊形改进与应用[J].中南大学学报，2007，38（10）：937-942.
［4］杨光辉，曹建国，张杰，等.SMART Crown冷连轧机板形控制新技术改进研究与应用[J].钢铁,2006,41(9):56-59.
［5］李传民.Deform5.03金属成形有限元分析实例指导教程[M].北京：机械工业出版社，2006.
［6］张彦敏.有限元在金属塑性成形中的应用[M].北京：化学工业出版社，2010.
［7］吴建军，张萍.基于板料理想成形的有限元方法研究[J].锻压技术，2008，33(1)：131-132.
［8］张启修.钨钼冶金[M].北京：冶金工业出版社，2007.
［9］王国栋.中国中厚板轧制技术与装备[M].北京：冶金工业出版社，2009.
［10］Walde T. Plastic anisotropy of thin molybdenum sheets[J].International Journal of Refractory Metals and Hard Materials， 2008,26(5):396-403.

Service：

【This site has not yet opened Download Service】【Add Favorite】