Transactions of Materials and Heat Treatment

Title：Introduction of hydraulic press with integrated cylinder and beam

Authors： WANG Zhong-ren WANG Xiao-song HE Zhu-bin HAI Jin-tao LU Xin

Unit： Harbin Institute of Technology Machinary Research Academy

KeyWords： hydraulic press integrated cylinder and beam semi\|spherical hydraulic cylinder

ClassificationCode：TG315.4

year,vol(issue):pagenumber：2011,36(5):55-56

Abstract：

The structural features of hydraulic press with integrated cylinder and beam (HPICB) was introduced compared to traditional three beam four pillars hydraulic press，whose advantages can be included as follows: the weight is evidently decreased because of abrogating upper beam，the area of hydraulic cylinder is enlarged 35 times, additionally, the semi\|spherical cylinder can support two times pressure compare to the traditional cylinder with same diameter and wall thickness. So the capacity of the HPICB can be enlarged 68 times than the traditional press with same contour. The HPICB presents a new way for manufacturing large capacity press over 10 MN.The main size of semi\|spherical cylinder for HPUCB from 50 MN to 900 MN was described.Finally，the possible application scope of HPUCB was summarized.

Funds：

Reference：

[1]王仲仁，苑世剑，王小松，等. 缸梁一体式压力机:中国专利,2010105026885
［P］. 2010-10-05.

[2]蔡墉. 世界大型自由锻和模锻液压机装备数量分布一览[J].锻造与冲压, 2006, (8):85-86.

[3]俞新陆. 液压机设计与应用[M]. 北京: 机械工业出版社, 2004.

[4]林峰, 颜永年, 吴任东, 等．现代重型模锻液压机的关键技术[J]. 机械工程学报, 2006, 42(3): 9-14.

[5]苑世剑.现代液压成形技术[M]. 北京: 国防工业出版社,2008.

[6]化工设备设计全书编辑委员会. 球形容器设计[M]. 上海: 上海科技出版社, 1987.

[7]赵长财, 孙雅权. 水压机工作缸缸底裂纹分析及修复[J].锻压机械, 1997, (6):56-57.

[8]王仲仁, 张琦. 省力与近均匀成形—原理与应用[M]. 北京: 高等教育出版社, 2010.

[9]吴生富, 金淼, 聂绍珉, 等. 液压机全预紧组合机架的整体性分析[J]. 锻压技术, 2006, 31(3): 111-114.

[10]杨固川, 于江, 陈文, 等. 大型模锻液压机的工作压力及工作缸布置分析研究[J]. 锻压技术, 2011, 36(3): 77-79.

Service：

【This site has not yet opened Download Service】【Add Favorite】