Transactions of Materials and Heat Treatment

Title：Mechanical analysis of stamping die components based on Pro/E

Authors： CHEN Yong-xing

Unit： Shanxi Polytechnic Institute

KeyWords： Pro/E stamping die components mechanical analysis

ClassificationCode：TG386

year,vol(issue):pagenumber：2012,37(2):167-170

Abstract：

The methods of mechanical analysis for stamping die components based on the Mechanica module of Pro/E was introduced by a specific example. The results of the analysis were evaluated, and were compared with mechanical analysis results for stamping die parts. The reasons caused by analysis result error were largely due to constraints and connection settings. For example, contact interfaces were setted between die plates in components analysis and not plane constraint in single part analysis, screw connection and pin constraints were setted between die plates in components analysis and not fixed constraints in single part analysis,etc. It provides a simple and efficient method that can accurately predict the stress and strain of stamping die components.

Funds：

陕西工业职业技术学院院级科研项目（ZK10-19)

Reference：

［1］黄荣学, 曹建国, 范洪远. 有限元法在冲压模具分析中的应用及展望[J]. 锻压技术，2005,29(2):69-72.
［2］姜海建. 切边、冲孔、压弯、切断级进模设计[J]. 模具工业，1996,(6):18-20.
［3］Duan W, Zhou J, Lai K. FSMT: A feature solid-modelling tool for feature based design and manufacture[J]. Computer Assisted Design, 1993,(1):29-38.
［4］ Choi J C, Kim B M, Chul Kim. An automated progressive process planning and die design and working system for blanking or piercing and bending of a sheet metal product[J]. The International Journal of Advanced Manufacturing Technology, 1999, 15(7):485-497.
［5］彭广威. 基于PDX的电器接线卡多工位级进模具设计[J]. 模具技术,2009,(4):26-28.
［6］张正修. П形件多工位冲模的设计[J]. 机械工程师, 1994,(6):15-19.
［7］孙筱. 冲压模具设计Pro/E三维技术应用[D]. 阜新: 辽宁工程技术大学, 2007.
［8］陈永兴. 基于PRO/E冲压连续模具的CAD及力学设计研究[D]. 西安: 陕西科技大学, 2010.
［9］葛正浩, 杨芙莲. Pro/ENGINEER Wildfire 3.0 机械结构有限元分析[M]. 北京: 化学工业出版社, 2008.
［10］Gadala M S, Wang J.Computational implementation of stress integration in FE analysis of elasto-plastic large deformation problems [J]. Finite Elements in Analysis and Design, 2000, 35 (4) : 379-396.
［11］张贵宝, 陈军, 王晓方. 基于板料成形数值模拟的冲压模具结构分析方法[J]. 机械工程学报，2008,44(8):174-179.
［12］张文志, 韩清凯, 刘亚忠，等. 机械结构有限元分析[M]. 哈尔滨: 哈尔滨工业大学出版社, 2006.

Service：

【This site has not yet opened Download Service】【Add Favorite】