Transactions of Materials and Heat Treatment

Title：Effect of process parameters on formability in single point incremental forming

Authors： TAO Long WANG Jin JIANG Hu-sen

Unit： Qingdao Technological University

KeyWords： single point incremental forming maximum wall angle orthogonal design

ClassificationCode：TG386.41

year,vol(issue):pagenumber：2012,37(3):19-22

Abstract：

2A12 sheet metal was employed as the experimental material, used maximum wall angle as a formability representative, the variation in the process parameters affecting the formability in single point incremental forming was investigated. The process parameters affecting the formability were studied, such as tool radius, step size, federate and spindle speed. Sheet metal forming limit in single\|point incremental forming was studied based on orthogonal design. The experiment results show that step size in the forming process has a considerable influence, and the others in sequence are the feeding rate, spindle speed and tool radius.

Funds：

山东省高等学校科技计划资助项目（J10LD13）

Reference：

［1］周六如, 肖祥芷, 莫健华. 板料零件数控渐进成形工艺研究[J]. 塑性工程学报, 2003,(4):27-29.
［2］Hussain G, Gao L, Dar N U. A comparative study on the forming limits of an aluminum sheet\|metal in negative incremental forming[J]. Journal of Materials Processing Technology, 2006,186:45-53.
［3］Leach D,Green A J,Bramley A N, A new incremental forming process for small batch and prototype parts[A]. Proceedings of the Ninth International Conference on Sheet Metal[C]. Leuven, 2001.
［4］Matsubara. A computer numerically controlled dieless incremental forming of a sheet metal proceedings of the institution of mechanical engineers[J]. Journal of Engineering Manufacture, 2001,215(7):959-966.
［5］Kim T J, Yang D Y. Improvement of formability for the incremental sheet metal forming process[J]. International Journal of Mechanical Sciences, 2000, (42):1271-1286.
［6］Young D. Formability in computer numerically controlled single point incremental forming[D]. Canada:Queens University, 2003.
［7］Wei H Y,Gao L,Li S G. Investigation on thickness distribution of bulge type incrementally formed sheet metal part with irregular shapes[A].Proceedings of the IMCC[C]. China, 2004.
［8］李云雁，胡传荣.试验设计与数据处理[M]. 北京:化学工业出版社，2008.
［9］Shim M S, Park J J. The formability of aluminum sheet in incremental forming[J]. Journal of Materials Processing Technology, 2001, 113:654-658.
［10］Jeswiet J, Micari F, Hirt G, et al. Asymmetric single point incremental forming of sheet metal[J]. Annals of CIRP, 2005, 54(2):623-650.
［11］Kim Y H, Park J J. Effect of process parameters on formability in incremental forming of sheet metal[J]. Journal of Materials Processing Technology, 2002,130131:42-46.

Service：

【This site has not yet opened Download Service】【Add Favorite】