Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Constitutive equation of HPb59-1 brass during hot compression and its application
Authors: XIAO Yan-hong GUO Cheng 
Unit: Xi'an Jiaotong University 
KeyWords: HPb59-1 brass  constitutive equation  hot-extrusion  numerical simulation 
ClassificationCode:TG376.2
year,vol(issue):pagenumber:2012,37(3):127-132
Abstract:

The high-temperature deformation behavior of HPb59-1 brass was investigated by isothermal compression tests in the temperature range of 650800 ℃ and the strain rate range of 0.1-10s-1. The true stess-true strain curves show that the stress level decreases with increasing of temperature and decreasing of strain rate. The constitutive equation of HPb59-1 brass was proposed by means of fitting the experimental data and verified. Then, the hot extrusion process of a part with square flange was analyzed using Deform-3D and the forming laws were obtained. Finally, the validity of this research results were proved by practice, which provided some references for engineering application.

Funds:
AuthorIntro:
Reference:


[1]邓予生.HPb59-1带断裂的原因分析及措施[J].甘肃冶金,2010,32(2):110-112.
[2]郭小艳,肖艳红.超高强度铝合金7A04高温流变行为的研究[J].锻压技术,2011,36(4):138-142.
[3]Liu J, Cui Z S, Li C X. Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B [J]. Comput Mater Sci., 2008, 41:375-382.
[4]张小刚,潘清林,梁文杰,等. 01570铝合金热压缩变形的流变应力本构方程[J].锻压技术,2009,34(1):139-142.
[5]Lin Y C, Chen X M. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working[J]. Mater. Des., 2011, 32: 1733-1759.
[6]Xiao Y H, Guo C. Constitutive modeling for high temperature behavior of 1Cr12Ni3Mo2VNbN martensitic steel [J]. Mater. Sci. Eng. A, 2011, 528:5081-5087.
[7]张红钢,张辉,彭大署.KFC铜合金热压缩变形流变应力[J].热加工工艺,2004, (1):21-24.
[8]周晓华,柳瑞清.高温下几种铜合金流动应力的研究[J].有色金属加工,2003,32(1):21-23.
[9]Xiao Y H, Guo C. Constitutive modeling of hot deformation behavior of H62 brass[J]. Mater. Sci. Eng. A, 2011, 528:6510-6518.
[10]Sellars C M, Mctegart W J. On the mechanism of hot deformation[J]. Membr. Sci. Rev. Metall, 1966, 63:731-746.

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com