Transactions of Materials and Heat Treatment

Title：Simulation of 60AT rail molding forming process

Authors：

Unit：

KeyWords：

ClassificationCode：TG316.3

year,vol(issue):pagenumber：2012,37(1):169-173

Abstract：

The current forming process of 60AT rail was described, and the new process was simulated by using Deform, whose operation of forming is automatic completely under high temperature. The results show that the final cavity shape is rational by comparing shape of different workpieces after simulation. Then the new forming process was simulated again with the new mold model. And the thermal molding process of 60AT rail was determined through analysis of metal flowing pattern, and its distribution of stress, strain and temperature.

Funds：

Reference：

[1]钱利锋.50AT尖轨跟端模锻成型过程数值模拟及工艺分析[D].大连：大连交通大学，2009.

[2]于宝东.铁路道岔新型60AT轨跟端模锻模具设计[J].热加工工艺，2005,（8）:42-44.

[3]任建旭,胡亚娟.AT型尖轨跟端无切削锻造工艺的设计[J].哈尔滨铁道科技,2000,(4):15-16.

[4]雷斌,谭延亮.AT尖轨生产工艺流程及光关键工艺设计[J].机电技术,2008,(1):45-46.

[5]宋建华,潘高峰,李森，等.模腔对AT尖轨模锻成形影响规律的研究[A].塑性工程学会.第十二届塑性加工学术年会论文集[C].北京，2011.

[6]李革,贾宝华,姜旭.百米U75V钢轨矫直前冷却过程弯曲变形的有限元分析[J].特殊钢,2010,31(3):14-15.

[7]钱利锋,候英玮.U75V钢流动应力的实验研究[J].锻压技术,2009,34(5):132-135.

[8]李革,崔海燕,陈林.百米U75V钢轨矫直前冷却过程温度场的有限元分析[J].特殊钢,2009,30(1):1-3.

Service：

【This site has not yet opened Download Service】【Add Favorite】