Transactions of Materials and Heat Treatment

Title：Research on servo press primary processing curve mode and advantages

Authors： ZHANG Gui-cheng1 HAN Zhong2 LI Jian-ping1 ZHAO Sheng-dun3 YUAN Rui-qiang1 ZHANG Chao3

Unit： 1.Guangdong Metal Forming Machine Works Co. Ltd. Foshan 528000 China 2．Post Doctor Scientific Research Station Guangdong Metal Forming Machine Works Co. Ltd. Foshan 528000 China 3．Xi'an Jiaotong University Xian 710049 China

KeyWords： servo press processing curve forging

ClassificationCode：TG315

year,vol(issue):pagenumber：2012,37(5):87-94

Abstract：

The main processing curve modes of servo presses of ordinary type, static sound blanking type, efficient drawing type,in-die heating type ect. were described. And the advantages of servo presses in the high production efficiency, better forming accuracy, long life die, saving energy, low noise and vibration, etc. were elaborated，parts of which were analyzed and compared with the mechanical press. The results show that the servo press has more incomparable advantages than traditional mechanical press，from which it can be seen that the servo press will gradually replace the traditional mechanical press and become the new benchmark forging technology and equipment development in the future.

Funds：

广东省教育部产学研结合项目(2011A090200060);广东省中国科学院全面战略合作项目(2009B091300019);粤港关键领域重点突破项目（2009Z019）；广东省重大科技专项项目（2008A090300008）

Reference：

［1］南雷英.基于伺服驱动机械压力机的静音冲裁工艺研究[J].广州：广东工业大学, 2007.
［2］张贵成,黄鹏,李建业.伺服压力机工作能力设计[J].锻压装备与制造技术,2009，44(3)：26-28.
［3］孙友松,张宏超.金属板材加工设备发展新动向——2004上海国际金属板材加工设备展览会[J].锻压技术,2004,29(4):1-4.
［4］中国机械工程学会锻压学会.锻压手册:第2卷冲压[M].北京:机械工业出版社,2002.
［5］永田有机，徐大任. 通过伺服冲压进行高附加价值的加工[J]. 锻造与冲压,2005,(5):52-54.
［6］莫建华,郑加坤,吕言,等.伺服压力机的发展现状及其应用[M]. 锻压装备与制造技术,2007，30(5)：19-22.
［7］陈松.数控转塔冲床伺服电机主传动的研究[D].保定：华北电力大学, 2008.
［8］Watanabe A,Kotani Y,Nishimura K, et al. Effects of elastic behaviours of dies and servo press machine on deep drawing process[A].ICROS-SISE International Joint Conference 2009[C].Fukuoka,2009.
［9］王孝培. 冲压加工手册[M].2版.北京:机械工业出版社,2009.
［10］何德誉.曲柄压力机[M].北京：机械工业出版社，1981.
［11］马闯. 肘杆式数控冲床的分析与优化[D]. 南京：南京航空航天大学, 2007.
［12］孙友松,周先浑,黎勉,等.交流伺服压力机及其关键技术应用[J].锻压技术,2008,33(4):1-8.

Service：

【This site has not yet opened Download Service】【Add Favorite】