Transactions of Materials and Heat Treatment

Title：Analysis of automotive stamping parts cost control based on stamping process

Authors： WANG Xiao-hong

Unit： Mechanical and Electrical Engineering College Wuxi Vocational and Technical College of Business Wuxi 214153 China

KeyWords： stamping process stampings process assessment costs control

ClassificationCode：TG386

year,vol(issue):pagenumber：2012,37(6):138-142

Abstract：

Combined with the actual situation of preparation and production of automotive stamping parts，the cost control method of automotive body stamping parts was discussed based on stamping process. How to cut the cost through the technology review of stamping parts in the product design stage was discussed. Some effective stamping processes considering reasonable selection of material, control of production process and make full use of equipment capacity, etc. in stamping process design phase were proposed to reduce the production cost of stamping products and increase economy.

Funds：

Reference：

［1］徐虹. 汽车超高强钢防撞梁热成形试验[J].吉林大学学报:工学版,2011,(S1):111-114.
［2］李洪波. 轿车后地板拉深工艺模型确定与成形过程数值模拟[J].模具工业,2010,(9):30-33.
［3］曹立文. 新编实用冲压模具设计手册[M].北京:人民邮电出版社,2007.
［4］屈晓刚.提高钢板下料材料利用率的措施[J].机械制造,1998,(12):38-39.
［5］张学文,陈中春. CAE技术在后纵梁成形工艺及调试中的应用[J].锻压技术,2011,36(3):23-26.
［6］任小鸿.汽车同步器齿环精密锻造模具的改进与应用[J].锻压技术, 2011, 36(2): 87-89.
［7］刘白,刘明俊,赵振宇,等.金属管材端部内卷成形加工的数值分析[J].锻压技术, 2011, 35(1): 24-28.
［8］黄少东,赵志翔,符韵,等.高强度钢厚板冲裁研究[J]. 锻压技术, 2010, 35(3): 34-37.
［9］江昌勇.多工序冲压成形的过程控制研究[J]. 锻压技术, 2011, 35(5):42-46.
［10］罗云华,王磊.高强钢板冲压回弹影响因素研究[J].锻压技术, 2009, 34(1): 23-26.
［11］王晓红.汽车覆盖件拉深工艺研究[J].模具工业, 2012, 38(2): 41-44.

Service：

【This site has not yet opened Download Service】【Add Favorite】