Transactions of Materials and Heat Treatment

Title：Numerical simulation of rapid hydraulic forming process for thickwall tube

Authors： YANG Chun-lei LANG Li-hui WANG Xiu-feng WANG Shao-hua

Unit： School of Mechanical Engineering and Automation Beihang University Beijing 100191 China

KeyWords： rapid hydraulic forming numerical simulation ANSYS/LS-DYNA tube part with thick wall

ClassificationCode：TG394

year,vol(issue):pagenumber：2013,38(2):61-64

Abstract：

Rapid hydraulic forming is an advanced forming technology that the impact of highenergy liquid is used to accomplish elastic-plastic forming of metal parts. Since this method can provide high forming pressure and energy in a short time, parts with big local deformation can be formed conveniently, thus the tonnage of equipment can be reduced. Based on the completed rapid hydraulic forming experiments of thick walled tube, numerical simulations for the process were done by using finite element software ANSYS/LSDYNA, and the results of numerical simulation and experiments were basically consistent. At the same time, the tube deformation process was analyzed according to the numerical simulation results, the displacement curve and the tube wall thickness curve were also plotted, and the numerical simulation results provide a basis for further process optimization.

Funds：

工信部国际科技合作资助项目（2010DFA52030）；国家自然科学基金资助项目（1175024）

Reference：

［1］Lang L H, Wang Z R, Yuan S J, et al. Hydroforming high-lights: sheet hydroforming and tube hydroforming [J]. Journal of Materials Processing Technology, 2004, 151(1/3): 165-177.
［2］Siegert K, Haussermann M, Losch B, et al. Recent development in hydroforming technology [J]. Journal of Materials Processing Technology, 2000, (98): 251-258.
［3］李涛, 郎利辉, 安冬洋, 等. 航空铝合金复杂构件充液柔性成形过程及质量控制研究[J]. 中国机械工程, 2006,17(S1): 8-11.
［4］李峰. 特种塑性成形理论及技术[M]. 北京: 北京大学出版社, 2011.
［5］毛卫民. 金属材料成形与加工[M］. 北京: 清华大学出版社, 2008.
［6］齐军, 王小松, 苑世剑, 等. 管材液压成形技术的发展——从前8届国际塑性加工会议看管材液压成形技术的发展[J]. 塑性工程学报, 2008, 15(4): 6-12.
［7］郑再象, 沈辉, 秦永法. 管件液压成形技术及其发展[J]. 机床与液压, 2011, 39(11): 39-42.
［8］郎利辉, 王永铭, 段新民, 等. 复杂薄壁微小截面环形件的充液成形技术研究[J]. 锻压技术, 2011, 36(2): 34-38.
［9］朱永豪, 许丽瑛, 冯长印, 等. 冲击液压成形装置[R]. 中国机械工程学会第三届锻压年会. 北京：北京工业大学机械工程学系锻压教研室, 1983.
［10］中国航空材料手册编辑委员会. 中国航空材料手册:第1卷结构钢不锈钢 [M]. 北京: 中国标准出版社, 1988.
［11］赫好山, 胡仁喜, 康士廷, 等. ANSYS12.0 LSDYNA 非线性有限元分析从入门到精通[M]. 北京: 机械工业出版社, 2010.

Service：

【This site has not yet opened Download Service】【Add Favorite】