Transactions of Materials and Heat Treatment

Title：Design of control system for multi-link servo press

Authors： TANG Shi-song ZHONG Tai-sheng LUO Su-ping ZHAN Jun-yong

Unit： Jiangsu Yangli Group Co. Ltd.

KeyWords： servo motor multi-link control system monitor program

ClassificationCode：TG315.5

year,vol(issue):pagenumber：2013,38(4):97-100

Abstract：

According to the process requirements of crank press and servo motor controlling principle, 1600 kN multi-link AC servo press was designed. The flywheel and clutch were eliminated. The flexible and intelligent control of the servo press was realized. The software program of the control system and several operation interfaces in monitor program were developed. The transmission system and AC servo drive control system of the press were introduced. The mathematic model of six-link rod was established. The calculated results show that six-link rod has obviously amplified drive power. It is conducive to further optimize the mechanical structure and reduce the cost of the servo press.

Funds：

汤世松（1985-），男，硕士，工程师

Reference：

［1］吕言，周建国，阮澍.最新伺服压力机的开发以及今后的动向[J].锻压装备与制造技术，2006，（1）：11-14. Lu Y, Zhou J G, Ruan P. Latest servo presses and future development trends [J]. Metalforming Equipment & Manufacturing Technology,2006,(1):11-14.
［2］姚健，周微，郭为忠.多连杆压力机模块化运动学性能分析[J].锻压技术，2008，33（6）：111-116. Yao J，Zhou W，GUO W Z. Modular analysis of kinematics performances for multi-link mechanical presses [J]. Forging & Stamping Technology，2008，33（6）：111-116.
［3］孙友松，周先辉，黎勉，等.交流伺服压力机及其关键技术[J]. 锻压技术，2008，33（4）：1-8. Sun Y S, Zhou X H, Li M. AC servo presses and their key techniques [J]. Forging & Stamping Technology，2008，33（4）：1-8.
［4］莫健华，郑加坤.伺服压力机的发展现状及其应用[J].锻压装备与制造技术，2007，（5）：19-22. Mo J H,Zeng J K. The developing status and application of the servo press [J]. Metalforming Equipment& Manufacturing Technology，2007，（5）：19-22.
［5］王猛，马继斌，项余建，等. SDP-110型伺服压力机控制系统的开发研究[J]. 锻压装备与制造技术，2011,(2)：50-53. Wang M, Ma J B, Xiang Y J, et al. Development and research on control system of SDP-110 type servo press[J]. Metalforming Equipment& Manufacturing Technology，2011,(2)：50-53.
［6］樊红梅，孙宇，李林. 伺服电机直接驱动的压力机控制系统研究[J]. 锻压技术，2007，32（4）：113-116. Fan H M, Sun Y, Li L. Research on control system of servo-driven press [J]. Forging & Stamping Technology，2007，32（4）：113-116.
［7］陈伯时，陈敏逊.交流调速系统[M].北京：机械工业出版社，2005. Chen B S，Chen M X. AC Speed-Change System[M].BeiJing：Machinery Industry Press，2005.
［8］Suman Maiti ,Chandan Chakraborty,Sabyasachi Sengupta. Simulation studies on model reference adaptive controller based speed estimation technique for the vector controlled permanent magnet synchronous motor drive [J]. Simulation Modelling Practice and Theory, 2009,(17):585-596.
［9］刘涛，王铮，喻宝林.多连杆压力机杆系数学模型[J].一重技术，2010,5（23）：9-12. Liu T, Wang Z, Yu B L. Mathematical model for multi-link mechanical press[J].CFHI Technology，2010,5（23）：9-12.
［10］莫健华，张正斌，吕言.三角肘杆式伺服压力机传动机构的仿真与优化[J] .锻压装备与制造技术，2011,（1）：21-25. Mo J H, Zhang Z B, Lv Y. Triangle toggle servo press drive mechanism simulation and optimization[J]. Metalforming Equipment & Manufacturing Technology, 2011,(1):21-25.
［11］Lv Y, Zhou J G, Ruan S. The newest development of servo press and future[J]. Metalforming Equipment& Manufacturing Technology，2008,（1-2）：93-98.
［12］Zhao T T，Zhu Y J，Jia M Q. Principles and characteristics of switched reluctance motor with numerical control system driving technology for press [J] . Metalforming Equipment& Manufacturing Technology，2011,（1）：21-25.

Service：

【This site has not yet opened Download Service】【Add Favorite】