Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Forging process and die design of knuckle F51AE
Authors: BU Wen-xue   ZHAO Zeng-hua   YANG Yong   HU Fu-rong 
Unit: Qiqihar Railway Rolling Stock Co.  Ltd. Beijing Research Institute of Mechanical and Electrical Technology 
KeyWords: forged knuckles  forging die  folding defect 
ClassificationCode:TG316
year,vol(issue):pagenumber:2013,38(5):29-32
Abstract:

The forged knuckle is a kind of common drawing components used for couplers of railway wagons. The product has various sections,complicated shape and thin rib, which is difficult to form. According to the characters of forged knuckles, the process schemes were developed and draft angle and radius were optimized. The folding defect was simulated and the solutions were presented. Further, the forging dies were designed based on optimized technical process. Finally, the practical test shows that the parts of volume product are good.

Funds:
AuthorIntro:
卜文学(1969-),男,工程硕士,高级工程师
Reference:


[1]李尚健. 锻造工艺及模具设计资料[M] . 北京: 机械工业出版社,1991.Li S J. Forging Process and Die Design[M]. Beijing: China Machine Press,1991.
[2]杜云慧,张励忠,刑书明,等.钩舌常见失效形式与机理[J]. 金属热处理, 2003,28(6): 48-52Du Y H, Zhang L Z, Xing S M, et al. Failure forms of the hook-head and its mechanism[J].Heat Treatment of Metals, 2003,28(6): 48-52.
[3]唐振英,唐林, 赵增华,等.铁路货车锻造钩舌成形工艺及数值模拟优化[J]. 锻压技术,2012,37(3):14-16.Tang Z Y, Tang L, Zhao Z H, et al. Forging process and FEM optimization for forged knuckles of railway wagons[J]. Forging&Stamping Technology, 2012,37(3):14-16.
[4]徐倩, 谢基龙, 缪龙秀,等. 基于单轴损伤的货车钩尾框多轴疲劳寿命分析[J]. 铁道学报, 2002,24(1):19-22.Xu Q, Xie J L, Miao L X, et al. Analysis of multi-axial fatigue life based on single axial stress condition of the coupler yoke[J]. Journal of the China Railway Society,2002,24(1):19-22.
[5]王凯, 王皓, 唐振英,等. 13B型货车钩尾框框体锻造工艺模拟及优化[J]. 锻压技术, 2013,38(2):14-16Wang K, Wang H, Tang Z Y, et al. Forging process and FEM optimization of 13B type forged yoke body for railway wagons[J]. Forging&Stamping Technology, 2013,38(2):14-16.

 

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com