Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Tensile performance of 50W800G silicon steel sheet with fore-flaw under different loading conditions
Authors: HE Yu-lin  SUN Ming-jun 
Unit: Jiangsu Polytechnic of Finance & Economics Shanghai Meishan Iron and Steel Co.  Ltd. 
KeyWords: silicon steel sheet  fore-flaw  loading condition 
ClassificationCode:TG142
year,vol(issue):pagenumber:2013,38(5):70-73
Abstract:

The stress strain relation of the fore-flaw sample for 50W800G  silicon steel sheet under different loading conditions was discussed. The results show that in the stress-strain curves of 45° and 90° crack tip of the  single axial perpendicular to the direction of the crack line,the elastic modulus and yield strength are lower than the smooth samples,which explains the singularity of the crack tips stress and strain field. The stress-strain curves of 45° and 90° crack tip of the double axles show that the stress increases slowly under load ratio of 2∶1 and 3∶1,and the curve of stress-strain is higher than that of load ratio 1∶1.
 

Funds:
AuthorIntro:
何玉林(1975- ),女,硕士,讲师
Reference:


[1]薛大为.平面应变条件下裂纹尖端附近的弹塑性近似分析[J].应用数学与力学,1980,1(1):107-112.Xue D W. An asymptotic elastic plastic analysis in plane strain deformation near a crack tip[J].Applied Mathematics and Mechanics,1980,1(1):107-112.
[2]丁华,薛松,张东,等. 基于拉伸试验的板料成形性能研究[J].锻压技术,2013,38(2):37-39.Ding H, Xue S, Zhang D, et al. Study of sheet metal forming performance based on tensile test
[J]. Forging & Stamping Technology, 2013,38(2): 37-39.
[3]任家陶,李冈陵.双向拉伸实验的进展与钛板双向拉伸的强化研究[J].实验力学,2001,16(2):196-197.Ren J T,Li G L.Biaxial tension test and the strengthening of titanium sheeets under biaxial tension[J]. Journal of Experimental Mechanics,2001,16(2):196-197.
[4]戴娟,汪大鹏,陈蕾,等.电测应力试验中应变片的粘贴技巧[J].湖南工程学院学报,2003,13(3):55-56.Dai J, Wang D P, Chen L,et al. Sticking technique of stain gauge in electrometric stress-test.[J].Journal of Hunan Institute of Engineering,2003,13(3):55-56.
[5]杨韶明,李树欣.用电阻应变片测量应力强度因子方法的研究[J].实验力学,1998,13(3):388-390.Yang S M , Li S X. A method for measuring model stress intensity factor with strain gages[J]. Journal of Experimental Mechanics,1998,13(3):388-390.

 

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com