Transactions of Materials and Heat Treatment

Title：Strike force measuring system of screw press based on LabVIEW

Authors： SHI Ran-ran LI Ming-yao ZHANG Bao-jian LI Xiao-xia MA Kai

Unit： Shanghai University of Engineering Science

KeyWords： screw press strike force LabVIEW ring upsetting

ClassificationCode：TG316.1+8

year,vol(issue):pagenumber：2013,38(5):123-126

Abstract：

The data of the strike force for heavy press can be measured effectively with the equipment based on LabVIEW. The strike force can be displayed, measured and stored on real time with actual utility. The strike force was calibrated by the ring upsetting，which could overcome the negative influence of the friction for the calibration. The data of the calibration were got by FEM，and the result shows that the calibration accuracy by FEM is higher than that by the cylinder upsetting with principal stress method. The low-carbon steel ring sample is also cheaper than the copper cylinder sample.

Funds：

上海市教育委员会科研创新资助项目（12ZZ183）；上海工程技术大学研究生科研创新资助项目（2012yjs13）

石然然（1988-），女，硕士研究生

Reference：

［1］毕见强,宋化远,张国强,等.锻压机械打击力测试方法的研究[J].山东机械,1994,(4):13-16.Bi J Q,Song H Y,Zhang G Q,et al. Research on strick force test method of forging machinery[J].Shandong Machinery,1994,(4):13-16.
［2］蒋启.压力机打击力检测研究[D].上海:上海工程技术大学,2011.Jiang Q.Research on the Testing of Press Hitting Power[D].Shanghai:Shanghai University of Engineering Science,2011.
［3］陈超,唐善华.基于LabVIEW 压力试验机测试系统的设计与实现[J].包装工程,2008,29(8):91-93.Chen C,Tang S H.Design and implementation of test system of pressure tester based on LabVIEW[J].Packaging Engineering,2008,29(8):91-93.
［4］徐磊,翟文涛,严利民.基于LabVIEW 的流量测试系统设计[J].仪器仪表用户,2008,22(4):70-71. Xu L,Zhai W T,Yan L M.Design of flow test system based on LabVIEW[J].Electronic Instrumentation Customers,2008,22(4):70-71.
［5］郑维彪.利用声卡进行振动信号采集和分析研究[D].江苏:南京航空航天大学,2008.Zheng W B.Researches of Vibration Signal Acquisition and Analysis Using Sound Card[D].Jiangsu:Nanjing University of Aeronautics and Astronautics,2008.
［6］陈树学,刘萱.LabVIEW宝典[M].北京:电子工业出版社,2011.Chen S X,Liu X.LabVIEW bible[M]. Beijing:Electronic Industry Press,2011.
［7］朱彦,雷君相,罗羽舟,等.基于LabVIEW液压成型机数据采集系统的设计[J].锻压技术,2012,37（1）:100-104.Zhu Y,Lei J X,Luo Y Z,et al.Design of data acquisition system for hydraulic pressure molding machine based on LabVIEW[J].Forging & Stamping Technology,2012,37（1）:100-104.
［8］付增祥,王海荣,苏少博.大吨位锻压设备力能特性标定的重要性和关键技术[J].机械科学与技术,2001,20(6)：890-891.Fu Z X,Wang H R,Su S B.The importance and key techniques for load/energy calibration of forging equipment with Large Capacity[J].Mechanical Science and Technology,2001,20(6)：890-891.
［9］韩志仁,陶华.基于有限元分析的摩擦系数确定[J].锻压技术,2008,33(1):136-138.Han Z R,Tao H.Determination of friction coefficient based on finite element analysis[J].Forging & Stamping Technology,2008,33(1):136-138.
［10］胡建军,李小平.Deform-3D塑性成型CAE应用教程[M].北京:北京大学出版社,2011.Hu J J,Li X P. Plastic Molding CAE Application Tutorial Based on Deform-3D.[M].Beijing:Cambridge University Press,2011.

Service：

【This site has not yet opened Download Service】【Add Favorite】