Transactions of Materials and Heat Treatment

Title：Forming process design and numerical simulation of drawing part with flanging

Authors： SUN Hui JI Ping-xin CHEN Yong-xing

Unit： Shaanxi Polytechnic Institute Northwest Institute of Electrical and Mechanical Engineering

KeyWords： flanging drawing part process parameters numerical simulation

ClassificationCode：TG386

year,vol(issue):pagenumber：2013,38(6):37-40

Abstract：

The forming process of the drawing part with flanging was researched, and the research results were analyzed and compared to determine the reasonable forming process scheme; the blank size of the drawing part was estimated by Dynaform software so that the calculation process was simplified, while numerical simulation analysis of the forming process for the drawing part was carried out and the rationality of the forming scheme and the process parameters were verified by preliminary simulation results; the drawing die was designed, the die was tested, and the qualified product was produced finally, the die-testing results were compared with the simulation results, and the good consistency was obtained. This method provides a practical reference value for the forming process of complex rotating drawing parts.

Funds：

陕西工业职业技术学院院级科研基金项目（ZK12-03)

Reference：

［1］郑光文，柳君，白凤梅，等.基于知识工程的连续拉深CAD/CAPP/CAE系统[J].锻压技术，2009，34（3）：148-151.Zheng G W, Liu J, Bai F M, et al. CAD/CAPP/CAE system of progressive deep drawing by knowledge based engineering [J]. Forging & Stamping Technology, 2009,34 (3):148-151.
［2］Hibbit H D. A finite element formulation for problems of large strain and large displacement[J].Int.J.Solids Structure,1970,（6）:25-27.
［3］Makinouchi A. Sheet metal forming simulation in industry[J]. J.Mater.Process.Technol.,1996,(60):19-26.
［4］翁其金.冷冲压技术[M].北京：机械工业出版社，2010.Weng Q J. Cold Stamping Technology [M]. Beijing: Mechanical Industry Press, 2010.
［5］蒋晓梅，曹素萍，庞利军，等.偏心手轮正反拉深复合模设计与改进[J].金属成形工艺，2009,(13)：43-44.Jiang X M, Cao S P, Pang L J,et al. Design and improvement of the pros and cons drawing compound die of eccentric hand wheel [J]. Metal Forming,2009,(13)：43-44.
［6］钟智勇，黄毅宏.反拉深的研究[J].机电工程技术，2001，(3)：36-38.Zhong Z Y, Huang Y H. A study on reversal deep drawing[J]. Mechanical & Electrical Engineering Technology, 2001,(3): 36 - 38.
［7］陶宏之，包向军，何丹农，等.板料反拉深成形的计算机仿真[J].计算机辅助工程，2000，（2）：57-61.Tao H Z, Bao X J, He D N, et al.Simulation of counter deep drawing of sheet metal[J].Computer Aided Engineering, 2000, （2）:57-61.
［8］杜剑平，曾健华.反拉深工艺毛坯尺寸计算的修正[J].现代机械，2001，（3）：59-60.Du J P, Zeng J H. Correction of the blank dimensions calculation of cons-drawing process[J]. Modern Machinery, 2001,（3）:59-60.
［9］王赓劼，吴文山，林娇弟，等.圆筒件多次拉深工序的数值模拟[J].轻工机械，2008，26（5）：43-45.Wang G J, Wu W S, Lin J D, et al. Numerical simulation of mult-stage drawing process of drawing cylinder[J]. Light Industry Machinery, 2008,26（5）:43 - 45.

Service：

【This site has not yet opened Download Service】【Add Favorite】