Transactions of Materials and Heat Treatment

Title：Bed structure design of horizontal spinning machine based on ANSYS Workbench

Authors： Xia Qinxiang Shi Fengbing Zhao Xuezhi Cheng Xiuquan

Unit： South China University of Technology Guangzhou Civil Aviation College

KeyWords： horizontal spinning machine bed structure ANSYS Workbench statics analysis dynamic analysis

ClassificationCode：

year,vol(issue):pagenumber：2014,39(1):136-141

Abstract：

Based on the gravity and forming force bored during spinning, the finite element simulation model of machine bed used for the shell-part spinning was established with ANSYS Workbench, and the distributions of equivalent stress and deformation and the first 4-order natural frequency and modal shapes were obtained by static and dynamic analysis. The finite element analysis on different structures of ribbed plate of machine bed, such as the “matts pattern”,“W pattern” and “double cross pattern” was carried out. The results indicate that the ribbed plate with “matts pattern” structure has both good static and dynamic performances, and also can realize the requirement of lightweight design goal of the spinning machine.

Funds：

国家自然科学基金资助项目(50275054)

夏琴香（1964-），女，博士，教授

Reference：

[1]王成和，刘克璋.旋压技术[M].北京：机械工业出版社，1986.

Wang Chenghe，Liu Kezhang. The Spinning Forming Technology [M].Beijing：China Machine Press，1986.

[2]程秀全，夏琴香.HGPX-WSY型液压仿形旋压成形机床的研制[J].新技术新工艺，2006，(7)：44-46.

Cheng Xiuquan，Xia Qinxiang. Research on HGPX-WSY automatic hydraulic copying neck spinning machine[J].New Technology & New Process，2006，(7)：44-46.

[3]杨盛福，赵长财，杜冰,等.基于有限元分析的CNG气瓶热旋压机本体机构设计及优化[J].锻压技术，2012，37(6)：47-52.

Yang Shengfu，Zhao Changcai，Du Bing，et al. Design and optimization of hot spinning machine structure for CNG gas cylinder based on finite element analysis[J].Forging & Stamping Technology，2012，37(6)：47-52.

[4]郭媛美，岳崇勤，丁晓红,等.基于ANSYS Workbench的外圆磨床的有限元分析及优化[J].机械设计与制造，2010，(1)：181-182.

Guo Yuanmei，Yue Chongqin，Ding Xiaohong，et al. Based on the ANSYS workbench cylindrical grinder of the finite element analysis and optimization[J].Machinery Design & Manufacture，2010，(1)：181-182.

[5]章婷.基于有限元法的锻压机床床身结构优化设计[J].锻压技术，2010，35(6)：74-78.

Zhang Ting. Structural optimization design for forging machine bed based on finite element method [J]. Forging & Stamping Technology, 2010，35(6):74-78.

[6]姜凤鹏.基于ADAMS和ANSYS的贴片机力学分析与结构优化[D].上海：上海交通大学，2008.

Jiang Fengpeng. Dynamic Analysis and Structural Optimization on ADAMS and ANSYS of Mounter[D].Shanghai：Shanghai Jiao Tong University，2008.

[7]Tao Z，Zhang H，Liu D P.Optimal design for the pedestal of CX8075 turning and milling machining center based on ANSYS[J].Journal of Vibration，2012，32（6）：966-969.

[8]池振坤，杨俊智，周强,等.基于ANSYS Workbench的大板式方舱模态分析[J].汽车工程学报，2011，1(3)：226-229.

Chi Zhenkun，Yang Junzhi，Zhou Qiang，et al. Analysis of Modal Characteristics of the Square Cabin based on ANSYS Workbench[J].Chinese Journal of Automotive Engineering，2011，1(3)：226-229.

[9]杨明亚，杨涛，王芳. 基于有限元的数控机床床身筋板的动态性能分析与优化设计[J].长春工程学院学报，2011，11(4)：38-41.

Yang Mingya, Yang Tao, Wang Fang. Dynamic analysis and optimization design of a NC machine tool bed based on finite element analysis[J].Journal of Changchun Institute of Technology, 2011，11(4)：38-41.

Service：

【This site has not yet opened Download Service】【Add Favorite】