［1］徐戊矫，朱若岭，周杰.大型船用曲轴TR法镦锻成形缺陷分析与工艺优化[J].热加工工艺，2010，39(7)：155-158.Xu Wujiao, Zhu Ruoling, Zhou Jie. Forming defect analysis and process optimization of heavy marine crankshaft formed by TR upsetting-bending[J]. Hot Working Technology, 2010, 39(7):155-158.
［2］洪慎章.齿轮轴冷挤压模具设计[J].模具制造，2009,(5)：63-65.Hong Shenzhang. Design of cold extruding die for the gear axis[J].Die & Mould Manufacture，2009,(5)：63-65.
［3］陈瑞刚，辛选荣，刘汀.多台阶轴类件冷挤压工艺设计系统[J].模具技术，2006,(3)：57-60.Chen Ruigang, Xin Xuanrong, Liu Ting. Design system of cold extrusion technology of multi-step shaft parts[J].Die & Mould Technology, 2006,(3)：57-60.
［4］温恩龙，周扬，李蒙.基于QFORM 的阶梯轴冷挤压工艺的计算机模拟[J].金属铸锻焊技术，2010，39(17)：110-114.Wen Enlong, Zhou Yang, Li Meng. Computer simulation of cold extrusion process for stepped shaft based on  QFORM[J].Casting Forging Welding, 2010, 39(17):110-114.
［5］李亮，王平，陈爱华.汽车起动机减速轴冷挤压数值模拟分析[J].机械设计与制造，2010,(12)：210-212.Li Liang, Wang Ping, Chen Aihua. Numerical simulation analysis of cold extrusion for speed-reducer shaft of autos starter[J]. Machinery Design ＆ Manufacture, 2010,(12):210-212.
［6］李军，张玉强，孟宪举.数据拟合在实心轴开式冷挤压最佳模角探究中的应用[J].河北理工大学学报:自然科学版，2010， 32(4):47-49.Li Jun, Zhang Yuqiang, Meng Xianju. Application on data fitting in the optimum die angle study of solid axis open-die cold extrusion[J]. Journal of Hebei Politechnic University:Natural Science Edition, 2010, 32(4):47-49.
［7］张双杰，刘玉忠，代学蕊，等.电机轴台阶挤压成形的数值模拟及实验研究[J].锻压技术，2009，34(4):99-101.Zhang Shuangjie, Liu Yuzhong, Dai Xuerui, et al. Numerical simulation and experimental research on open-die cold extrusion technology of electromotor shaft shoulder[J]. Forging & Stamping Technology, 2009, 34(4):99-101.
［8］冯文杰，胡玲珊，陈莹莹.花键轴冷挤压成形镦粗失稳分析[J].重庆工学院学报：自然科学版 , 2009,23(3)：39-42.Feng Wenjie, Hu Lingshan, Chen Yingying. Analysis on upsetting collapse in spline shaft cold extrusion forming[J]. Journal of Chongqing Institute of Technology:Natural Science Edition, 2009, 23(3):39-42.
［9］余承辉，王国林，卢洪德，等.花键轴冷挤压工艺及模具设计[J]. 模具制造，  2009，(10):85-89.Yu Chenghui, Wang Guolin, Lu Hongde, et al. Cold extruding process and die design for the spline axle[J]. Die & Mould Manufacture ,2009,(10):85-89.
［10］徐伟，夏巨谌，胡国安，等.轿车变速箱轴类件多工位冷精锻工艺及模具研究[J]. 锻压技术，2007，32(4):33-36.Xu Wei, Xia Juchen, Hu guoan, et al. Study on multistage cold precision forging process and die of the shaft in gear-box[J]. Forging & Stamping Technology, 2007，32(4):33-36.
［11］牛长根，王连广.摩托车主副轴冷挤压模具早期失效原因分析[J].摩托车技术，2009，(4):54-56.Niu Changgen, Wang Lianguang. An analysis of the cause leading to earlier failures of cold extrusion dies for motorcycle main shaft and counter shaft[J]. Motorcycle Technology, 2009，(4):54-56.
［12］郭永强，徐春国，任广升，等.挤压缩径工艺中缺陷的研究[J]. 锻压技术，2011，36(2):144-147.Guo Yongqiang, Xu Chunguo, Ren Guangsheng, et al. Study on defect in extrusion necking[J]. Forging & Stamping Technology, 2011, 36(2):144-147.
［13］李伟.汽车变速箱轴类件多工位冷精锻关键技术研究[D].武汉: 华中科技大学，2009.Li Wei. Study on Key Technology of Multistage Cold Precision Forging of the Shaft in Gearbox[D]. Wuhan: Huazhong University of Science and Technology, 2009.
［14］裴未迟，张玉强，孟宪举. 基于 Deform 轴类零件台阶圆角开式冷挤压工艺有限元模拟[J]. 现代制造工程， 2011，(6):73-83.Pei Weichi, Zhang Yuqiang, Meng Xianju. Finite element simulation for shoulder fillet of shaft parts in open-die cold extrusion process based on Deform[J]. Modern Manufacturing Engineering, 2011，(6):73-83.
［15］洪慎章．齿轮轴冷挤压工艺及模具设计[J]. 精密成形工程， 2013,5(1): 75-77.Hong Shenzhang. Cold extrusion technology and die design of gear shaft[J]. Journal of Netshape Forming Engineering, 2013, 5(1): 75-77.